Forum

I made this guide about making an Orchestral Template in Renoise, where I go through routing and other more technical stuff, there isn’t any actual music writing. I did my best to cover the most important things in less than 20min, but I’m not very good at editing.

I hope this video is helpful in regards to working with any number of third party sample based instruments. The most important take-away point is to group and route tracks together with channels from the sampler to organize the mess a little, proper titling and color coding is also nice!

1 post - 1 participant

Read full topic

Hey this is my first post here, just started playing around with Renoise, great software !

I recently installed the Duplex Tools, which allows me to use my APC20 in different ways, but what I would be really interested in is using it as a step sequencer (similar to the Duplex Sequencer mode on the Novation Launchpad), I’ve tried copying the config files from the launchpad and manually “porting” them to the APC, but being kind of a noob, it eeh, kinda almost works, close but no cigar I guess

There was a previous topics (linked below) within which an user shared a config file for doing exactly this but I can’t access the link (“Oops! That page doesn’t exist or is private.”)

Duplex Step Sequencer For Apc20? Renoise Tools Ah no, it didn’t include the config for the StepSequencer app. (Actually it’s easy to replace Matrix to StepSequencer, though [;)] ) Please wait a bit. Anyhow, I have to re-consider the layout since now we have the TrackSelector app too.

Does anyone has access to this file and would share it with me ?
Otherwise, could anyone try to help me porting the Duplex Sequencer to the APC20 ? (Or point me to useful ressources so that I can figure it out on my own maybe)
I’m not exactly an expert but it genuinely doesn’t seem too complicated and it seems like it would be a nice addition to Duplex (There’s actually quite a few controllers I can think of which would benefit from having a sequencer mode)

If we’re going the “do it from scratch” route, I’ll make a second post (Perhaps close this one and make a separate topic?) documenting my progress so far and where I’m struggling to get it right

Hope you can help

1 post - 1 participant

Read full topic

For a number of reasons (mainly working with long stems) I have had to make a temporary switch from Renoise, to Cubase + Redux. It is working very well so far aside from when I load up my Renoise Instruments into Redux, they are missing any external effects from the chain.

I have had a search but it looks like not possible to map a VST directory into Redux - the Plugins/Misc tab is missing from the Preferences.

Is this something that is impossible to implement due to the way Redux works as a VSTi, or something that may be added at a later date? It would be so so useful.

(I know I could go Rewire instead, but its a lot messier to mix than just using Redux which is awesome so far)

Thanks

1 post - 1 participant

Read full topic

hi all,

Do you have a controller recommendation to use with renoise please?

Thank you for your reply

1 post - 1 participant

Read full topic

I’ve been working in 24 bit and 44.1, and dithering to 16 bit for the master. I am conserving working in 96 or higher.

Should I? Is it worth it? Do you? If you do, how do you downsample? I assume you need to downsample to 44.1 and 16 bit… is this still the case?

1 post - 1 participant

Read full topic

It seems that the automation in Renoise 3.2.1 isn’t working right. It’s not possible to get 2 points on the same vertical line. For example…

This is how it looks if you don’t zoom in:

This is how it looks with maximum zoom:

As you can see it’s not possible to get the right point below the left point on the same position 4. It’s on position 4.01, which is the closest you can get, but it only can happen if you zoom in to the maximum. The less you zoom in, the less close the right point can be set to position 4. If you don’t zoom, the right point can only be set on position 5. Very annoying.

In Renoise 2.7.1 this was not the case, everything worked right.
What happened? Can it be fixed? What can I do?

Or is this another bug which nobody noticed like this one? Will it be fixed with the next update? Would be great!

3 posts - 3 participants

Read full topic

Hi!
Back to my tiny Make A Wish project, I was commissioned to make two musics for a beautiful visual novel with a sci-fi anime ambiance.

The game is currently under developement, but I can share the tracks on Soundcloud, so here are the tracks:

I have fun to make these, and I’m happy to come back to some videogame music. ^^

Main setup with Renoise:

• vst UVI Falcon (all synths)
• vst EastWest/Quantum Leap RA (for the koto in lofi track)
• various drum samples and fx

1 post - 1 participant

Read full topic

Hey everyone! no0b here.

I was looking around and tried various key combos but I am not sure if there is a feature to move the notes around the track with the arrow keys not just the cursor.

The other question I have is if I have notes spread across 5 tracks or something like that for the same instrument, is there a feature to collapse those as much as possible without overwriting other notes?

Any input would be much appreciated. Thank you!

1 post - 1 participant

Read full topic

So im still learning slowly. And I am wondering if anybody had any advice on the genre of hip hop? I use a midi controller to play out the drums but it still sounds too rigid. Do any of you use the humanize option on the track? How many lines-per-beat would you suggest? Thanks for your time.

1 post - 1 participant

Read full topic

Hello

Maybe i found a Bug. At least i think this can be unexspected behavior maybe. I use a Compressor in a Sample/Instrument FX editor. In Pic 0 you can see that the Pan for the Sample is neutral or 0.

if you now go to FX Chain View and manipulate the “Ratio” Parameter, then the Pan seems to change massively.
At least the Compressors Levelmeter shows that. You can see the Pan change in Pic 1, 2 and 3.

I hope this Bugreport is good enouph and usefull for the devs. I try give something back from the Community because i love your Software and respect all your hard work on it.

with best regards

3 posts - 3 participants

Read full topic

free music by EatMe free music by EatMe

Free music (mp3 + flac) by EatMe - download digital music for you..

new music

Mobilum
Ask for more
Aluf

idk wtf
plant a plant every day of your life
it takes a minute

#omgsomuchwater

1 post - 1 participant

Read full topic

Just a heads up.

https://www.pluginboutique.com/articles/1613

1 post - 1 participant

Read full topic

I haven’t used renoise in ages and decided to fire it up today and tried the check for updates option (not that I usually would do that). I noticed there is a new increment release and I’ve downloaded it but I wanted to know what was new and, unless I’m missing something obvious, I can’t find anything about the release. Renoise.com release announcement links to 3.2 release and searching the forum hasn’t led to anything.

So what’s new and why is it so hard to find the info?

1 post - 1 participant

Read full topic

First time ive used a VST in a song. Helm, if anybody is interested.

1 post - 1 participant

Read full topic

1

Exploring the percussive side 打楽器 of Plaits (macro oscillator 2). Late warm summer nights 熱帯の夜 deep woods and blueberryブルーベリー fields.

Be inspired - make it better!

1 post - 1 participant

Read full topic

I mean basicly, u can somehowe expose more devices and stop worry about “noobs”.

clear example of a work around.
noone likes it. What i think “we all are for what if breaks”. Suck yr tears in and lets talk.

1 post - 1 participant

Read full topic

link in the video description <3

let me know if you find interesting stuff

1 post - 1 participant

Read full topic

Hello together!

I want use the internally Mixer Channel faders in a Rewire Szenario with Reason 9.5. I use Rewire Input for Playing the instruments and this work without problems, but i want at least to use the mixing channel volume faders of Renoise to adjust the loudness, because switching between Programms for that will be boring. Any Suggest how to do Routing for that? Or its not able with the Demo Version because their limits?

And a Second Question. Is it able to use the Old Pattern Font? between 2.5 - 3.0 there was a switch. Dont know the exact Version. But in Internet i see the old Bolder Font and i like him more because he is more familiar with the old Amiga Tracker Style. Im commin from Protracker and later Fasttracker.

best regards

1 post - 1 participant

Read full topic

Hi,
I’ve re-uploaded the video with small audio improvements, hence my (previous) deleted post.

Cheers!

2 posts - 2 participants

Read full topic

(topic withdrawn by author, will be automatically deleted in 24 hours unless flagged)

1 post - 1 participant

Read full topic