Forum

In the picture, the channel on the far right is the Master channel in the “Mix” section, while the one below is the “Master Track” DSP panel.

The question is: What is the difference between the volume sliders in these two? Even though I get it down to -6.500 dB in one of the sliders, the peak is above -6.500 dB (as seen in the picture).

Why is it like this? Why do I have to bring both the track AND the mixer volume to -6.500 dB in order to have the peak below or around -6.500 dB?

1 post - 1 participant

Read full topic

Hi,

I don’t know if this message is suited for this category… Feel free to displace it (or I’ll do it if needed).

I’m looking for a pleasant way to record midi in real-time in renoise, because sometimes I like to play things as I imagine them instead of analyzing and passing them step by step (this is what midi recording is made for I presume)…

Given I’m terrible at piano (I’m working on that, but the progress is kind of slow), it can take me dozens of retries to get the thing up to my expectations, and I have issues with renoise’s way to handle midi recording.

Indeed, as I do when I record instruments in samples, I’d like to have a way to set a loop through my patterns and retry my recording as long as I don’t get it the way I want it, but with renoise, if you set this loop and begin to play, when you get back at the start of the loop, what you previously played also start to replay (as expected I should say), and there’s no way to retry but stop everything, delete, and retry…

Is there any trick to handle that type of recording ? I thought that recording to phrases that pops for each loop could record every attempt into separate phrases and I would be able to cherry pick every things I find useful, would that be possible with a external tool ? (even if it’s not already existing, I could try a little lua script for this POC)

By the way, are you happy with renoise midi recording, and if not, how do you handle it ? Do you use external tools a little more handy ?

Regards,

Christophe.

1 post - 1 participant

Read full topic

I’m new to 3.2.1 and enjoying it thoroughly thus far, but one silly thing is bugging me. Where are the song groove settings now? I want to put a swing on my track.

1 post - 1 participant

Read full topic

Another weird one:

1 post - 1 participant

Read full topic

Hi, I have some xtra mouse buttons on my mouse. I use them to control Keyboard Maestro and run macros + tasks + scripts.

Unfortunately, Renoise wants to get in on the action, and captures the extra mouse buttons and does stuff with them. I don’t want that to happen.

How do I stop Renoise capturing the special mouse buttons?

1 post - 1 participant

Read full topic

Hello,

I would like to show you mine ongoing project of creating linux music software/plugins database - http://linuxmusic.rocks.
Project is still in development, i think i covered most of paid software and big amount of free/open source ones.

Each software have picture of its interface or controls visible in ardour, there is placeholder for description and i hope to add it in near future :), or at least copy one provided by developer, if allowed.

Some software/plugins might be in wrong categories, for example tool category in effects was placeholder for everything i couldnt fit, and maybe at some point i decided to create dedicated category and forgot to move something from there.

I would appreciate any feedback.

occulkot/29a

2 posts - 2 participants

Read full topic

Latest Renoise version is randomly crashing a lot when opening songs. The error message says "unhandled exception in thread: GUI. It doesn’t matter if song uses external plugins or just built it devices, it crashes even when opening the tutorials that come bundled with Renose.

I’ve tried to disable all plugins and uninstalled the tools, but no difference.

I have attached the log file (it’s fresh). First project opened ok, after that I immediately opened a second project, which caused a crash.

Renoise.log (11.9 KB)

1 post - 1 participant

Read full topic

Just bought Reason 11 Intro in hope that it works with Renoise, as i used an older Demo (ver. 10) of Reason and it was possible to rewire with Renoise. Now, i can’t rewire because i dont see the reason device… any hints? I heard that Reason 11 lost the Rewire-Support, is that true? I think the only thing else i could do is to use something like an “internal” Midi-Loop-Back than, right? …but using Rewire would be the best solution, for recording i guess

3 posts - 1 participant

Read full topic

(topic withdrawn by author, will be automatically deleted in 24 hours unless flagged)

1 post - 1 participant

Read full topic

the open source cross-platform DAW

1 post - 1 participant

Read full topic

Guys, i liked Reason in the past (20 years ago ) , due i used my Amiga to control it via midi … now, i have no rewire or other options to controll, cants that be? Because i bought official Steinberg Hard and Software? As i know, renoise does not suport vst 3, but rewire…

2 posts - 2 participants

Read full topic

After installing Renoise 3.2.1 certain plugins GUI is not properly scaled to window size making them almost unusable. When making mouse clicks the clicks are handled as if the GUI size were the whole window so you must guess where the button would be in full size GUI.

Attached is example of wrongly size GUI editor window.

1 post - 1 participant

Read full topic

hi, is it possible to record a sequence from BlueArp to Renoise Track to get the full Control?

1 post - 1 participant

Read full topic

I’m exporting audio which is simply samples of single cycle waveforms creating pitched drones, quantised to 16 beats - loops which I can load into hardware samplers for analog signal processing. But in the exported audio, every time the pitch changes, I got a volume spike and some distortion. It’s just single cycle waveforms… Why would the volume change at all? Then I exported it with gaps in between pitch changes and the problem goes away. Renoise creates amplitude release for no reason. I checked the amp modulation and there is nothing, the sample should just end. I guess they are trying to get rid of pops but I’d rather have something transparent and deal with the pops myself. It also has some attack. To replicate real instruments maybe? I don’t want it to do this. This also means tracks aren’t really monophonic, since the artifical release envelope creates an overlap (which is what was causing my volume spikes and distortion). Do all daws work like this? 15905636058631624608916267864975|375x500

3 posts - 1 participant

Read full topic

I just downloaded the 3.2.1 demo since I’ve been thinking about upgrading. It sounds alright, but why can’t I get the convolver to not sound like shit? I get all these clicks, it’s either too quiet or it overdrives and clips like crazy, the effect it has on the sound isn’t particularly dramatic…am I missing something about it?

1 post - 1 participant

Read full topic

Here is an ambient track i have made. Please give it a listen!

1 post - 1 participant

Read full topic

Hi guys, how i can modulate vsts in reaper as a rewire in renoise. I know That Should work with instr. midi Control. But i am to stupid for this. I want to use the renoise lfo, because the reaper two ways of making lfo are limited.

1 post - 1 participant

Read full topic

Hello.

I am doing some chans on on youtube:

Also known as Bit Magic. The Protracker 3x series design was actually based on this module!

I also went on to do trance also, while still doing the configuration and consultancy work I did before on that chan.

Trance, on this chan: https://www.youtube.com/channel/UCi7TCodsP4Y4UTuIigrG9GQ

Where we promote tracking as a good alternative and style factor for good music. (KvR and regular sequencer never amounted to much did it)

We have also suggested polyphase interpolation for renoise, and horizontal view, and also promote 4 submix + mastering for original style sound.

Serene Greetings.

1 post - 1 participant

Read full topic

hello,
because I have no experience with mastering and all the setup is for me a way of trying to mistake please a simple example on this piece of track. I can’t match the guitar with the bass guitar. it all sounds weird
Thanks

download

1 post - 1 participant

Read full topic

Is there Midi Learn in Redux standalone?
Mapping of external controllers, knobs to parameters in Redux (Not Renoise)?

Best from here
Haines

1 post - 1 participant

Read full topic