Forum

@luisaguirre wrote:

I did a little research to see if I could make this, but I’m no programmer and I immediately felt like I was in over my head. Has anyone made or can anyone create a tool that displays FX parameters and Vol. Delay and Panning as Renoise Rotary Knobs? Basically this tool: https://www.renoise.com/tools/note-properties but including FX commands.

Maybe something already exists but I’ve searched and couldn’t find anything.

Posts: 1

Participants: 1

Read full topic

@Fabrice wrote:

I’m testing a trial version of vocaloid and I’ve noticed an option of this VSTi is a choice of 1 to 16 out channel on it (selection of output channel connected with host application, so here host is Renoise)

The fact is thats I don’t know what it is really mean and how can I know the output channel Renoise is using on my song?

Posts: 1

Participants: 1

Read full topic

@stoiximan wrote:

Ok here is another one.I used the drum loop(again) from Renoise Community Song Collab V6

If its not ok with you i will not publish it.

https://soundcloud.com/panos-kostagiannis/dream-by-panosk

Posts: 1

Participants: 1

Read full topic

@EatMe wrote:

Hello!

I have a new toy (Band-In-A-Box 2019)

But I can not push Stop in Renoise anymore.

It remains like this for a while:

And then in stays on Play:

Renoise is quite irresponsive with this plugin.

Posts: 1

Participants: 1

Read full topic

@moshen wrote:

Looking at the Arturia Keylab 49 mk2 or AKAI mpk249. It looks like the only one of those two with support in Renoise is the Keylab right now.

Any suggestions? Searching hasn’t yielded much, especially for a larger controller.

Thanks

Posts: 1

Participants: 1

Read full topic

@mostlyhands wrote:

Renoise versions 1.2, 1.25 and 1.26 came with a cool demo song called onmymind.rns that had 2 electric guitars playing in harmony. Renoise 1.27 (August 2003) and later versions came with an updated song, onmymind2.rns, that only had 1 guitar.

It’s taken me ages to find a download for the original, so I’m making this thread just to help anyone who googles “renoise on my mind nostalgia”.

None of those old Renoise demos are on https://www.renoise.com/archived-releases. I eventually found them at https://ftp.sunet.se/mirror/archive/ftp.sunet.se/pub/simtelnet/win95/musinst/ - rns12.exe rns125.exe rns126.exe rns1261.exe.

I wonder if it would be legal or polite to upload the rns or mp3 or video…

Posts: 1

Participants: 1

Read full topic

@chemeleon wrote:

I won’t say much about it… I think maybe I’m a little too verbose sometimes.

Anyway, here it is

Posts: 1

Participants: 1

Read full topic

@Raul wrote:

R3.2.0, W10

The log.txt:

Application: Caught an unhandled fatal exception (Thread: GUI)!
Application: Saving a backup…

Error Message: A fatal error or crash occurred (unhandled exception in thread: GUI).
Error Message: A backup of the current document was saved at
Error Message: ‘C:\Users\DF-85\AppData\Roaming\Renoise\V3.2.0\CrashBackups\DemoSong - DBlue - Tension_10_26_2019__13_39_crash.xrns’…
Error Message: This either happened because of a bug in Renoise, or because of a bug in one of its loaded components (plugins). Please contact bug@renoise.com and report this problem, so that it can be fixed.
Error Message: Note: It’s very important that we know exactly what has happened (what you were doing before this message popped up), or the problem cannot be replicated/analyzed. Please include a description of what you were doing and which components were being used…

CrashLog: Handling Exception! Code : C0000005
CrashLog: 0000000140B39336: l9_ippsLn_32f_A21 +76BD86
CrashLog: 0000000140B1106E: l9_ippsLn_32f_A21 +743ABE
CrashLog: 0000000140960094: l9_ippsLn_32f_A21 +592AE4
CrashLog: 000000014077BCB5: l9_ippsLn_32f_A21 +3AE705
CrashLog: 000000014077BCD9: l9_ippsLn_32f_A21 +3AE729
CrashLog: 000000014077BCD9: l9_ippsLn_32f_A21 +3AE729
CrashLog: 000000014077BCD9: l9_ippsLn_32f_A21 +3AE729
CrashLog: 000000014077BCD9: l9_ippsLn_32f_A21 +3AE729
CrashLog: 000000014077BCD9: l9_ippsLn_32f_A21 +3AE729
CrashLog: 000000014077BCD9: l9_ippsLn_32f_A21 +3AE729
CrashLog: 000000014077BCD9: l9_ippsLn_32f_A21 +3AE729
CrashLog: 000000014077BCD9: l9_ippsLn_32f_A21 +3AE729
CrashLog: 000000014077BCD9: l9_ippsLn_32f_A21 +3AE729
CrashLog: 000000014077BCD9: l9_ippsLn_32f_A21 +3AE729
CrashLog: 000000014077BCD9: l9_ippsLn_32f_A21 +3AE729
CrashLog: 000000014077BCD9: l9_ippsLn_32f_A21 +3AE729
CrashLog: 000000014077BCD9: l9_ippsLn_32f_A21 +3AE729
CrashLog: 000000014077BCD9: l9_ippsLn_32f_A21 +3AE729
CrashLog: 000000014077BCD9: l9_ippsLn_32f_A21 +3AE729
CrashLog: 000000014077BCD9: l9_ippsLn_32f_A21 +3AE729
CrashLog: 000000014077E013: l9_ippsLn_32f_A21 +3B0A63
CrashLog: 00000001406DD3B9: l9_ippsLn_32f_A21 +30FE09
CrashLog: 00000001406DC7D1: l9_ippsLn_32f_A21 +30F221
CrashLog: 00000001406DC459: l9_ippsLn_32f_A21 +30EEA9
CrashLog: 000000014077D73E: l9_ippsLn_32f_A21 +3B018E
CrashLog: 000000014077EC51: l9_ippsLn_32f_A21 +3B16A1
CrashLog: 000000014077F5D4: l9_ippsLn_32f_A21 +3B2024
CrashLog: 00000001407826A0: l9_ippsLn_32f_A21 +3B50F0
CrashLog: 000000014067828C: l9_ippsLn_32f_A21 +2AACDC
CrashLog: 00000001406D79BA: l9_ippsLn_32f_A21 +30A40A
CrashLog: 00000001406860E2: l9_ippsLn_32f_A21 +2B8B32
CrashLog: 00000001406ECFE4: l9_ippsLn_32f_A21 +31FA34
CrashLog: 00000001406F1CED: l9_ippsLn_32f_A21 +32473D
CrashLog: 00000001403FC443: l9_ippsLn_32f_A21 +2EE93
CrashLog: 00000001403F74CD: l9_ippsLn_32f_A21 +29F1D
CrashLog: 00000001403FCD36: l9_ippsLn_32f_A21 +2F786
CrashLog: 0000000140D62963: l9_ippsLn_32f_A21 +9953B3
CrashLog: 00007FFB1B387BD4: BaseThreadInitThunk +00014
CrashLog: 00007FFB1BAACED1: RtlUserThreadStart +00021

I have not thoroughly tested it in R3.2.1 b1. So I don’t know if it will affect too. I use a 150% scaling. This error occurs when turning the mouse wheel on the surface of the Renoise window. Simply, the main window closes without showing anything else.

I am using window tools, with several notifiers. Maybe they influence the mistake. But it shouldn’t happen that way. It is a critical error.

Posts: 1

Participants: 1

Read full topic

@Sqeetz wrote:

Hello,

in Renoise itself the toggle to play the sample from the cursor position works as it is supposed to do. No matter if you use the typing or a MIDI keyboard.

In Redux, though, it only works with the typing keyboard. With the MIDI keyboard the sample always plays from the beginning.

I’ve tested it in Bitwig, FL Studio and in Renoise itself. It’s all the same.

Posts: 1

Participants: 1

Read full topic

@lunchwithghosts wrote:

Hi all -

Total Renoise (and tracker) newb here. I’m following along with Bizzy B’s tutorial on how to chop breaks (https://youtu.be/wUQR798BXe8) and I’ve found that the default settings on my new install don’t match all of his. One big example was in the Keyzones section, under Drum Kit settings, he must have “Use first octave for transposing” based on how his keyzones look. It’s been about an hour and a half of trial and error trying to get my setup to match his, but I’m stuck on one part.

When he starts his session he has a BPM of 80 set (I understand this is randomized). I set mine to 80. He loads a sample, slices it, and renders the slices to a phrase. When he hits enter to play the phrase, it plays very slowly. He then ups the tempo to 170 and the sample plays at it’s original speed.

When I’m trying this, when I hit enter with the BPM set to 80 it plays at regular speed. When I then go to up the tempo to 170 it is playing way too fast.

I must be missing something stupid. I tried searching the PDF manual but couldn’t find anything that helped. Does anyone know what option I am looking for here?

Thanks so much!

Posts: 1

Participants: 1

Read full topic

@Wes wrote:

Hey guys,

I’m completely new to using DAWs and plug-ins. I’m currently toying around with Redux in Reaper, and I’m creating some pretty cool beats.

However, I have no idea how to actually use my phrases in Reaper. When I save in Redux, the file saves as a .xrni file, which I cannot open. Is there anyway to save my phrases as WAV files, so I can put them into my songs in Reaper?

Thanks in advance!

Posts: 1

Participants: 1

Read full topic

@lilith wrote:

With the latest update the automation improved a lot, but still I’m not 100% satisfied with it and I wonder what your impression is. Some points that could be improved imo. Or maybe I’m just to stupid to use it correctly

1. The line tool and the pencil tool are not consistent: In the pencil tool you delete points by double clicking on them, which is not possible in the line tool mode. It’s even not possible to delete points in the line tool mode, is it?

Would it be possible to delete points by selecting one or more points with a box by the right mouse key + e.g. Ctrl and hitting Del afterwards? This is for instance the method REAPER is using.

In the line mode I can move points vertically and horizontally with holding the left mouse key. In the pencil mode it’s drawing new points instead.

2. Sometimes it’s very hard to hit the points I want to delete and most of the time I have to zoom in first, because no point at all is deleted. Maybe some kind of snapping could help here?

3. Make simple Ctrl+C and Ctrl+V possible in the automation view to copy / paste automation patterns.
   Ok, it’s possbile when marking a region with Ctrl+left mouse key.

4. The red points to adjust curves can be moved vertically but not horizontally. I also like to have the possibility to adjust the sensitivity here. Or maybe implement some kind of acceleration?

5. In line mode there’s a info text: Hold down shift key to erase other points … double click to remove
   Double click and shift key is not working for me? Am I’m doing something wrong?

6. When being in line mode I often overwrite the automation when switching to another pattern. It only works when exactly hitting an other point in the other pattern

7. Is it possible to make cross pattern editing in the drawing mode possible? This discussion came up some months ago.

These are the major points, I guess there are still some minor things that could be improved.

What do you think?

Posts: 1

Participants: 1

Read full topic

@toimp wrote:

I’m not sure, if this is a bug or just the current way how pitch shifting / time stretching is working inside Renoise. I’ve attached a demo song with one pad sample and a cheesy little melody and it takes up 70% cpu usage on my i7 3770k. Maybe it’s possible to optimize it more

Shared with Dropbox

Edit: Ok, it seems lowering the beat sync pattern lines amount also reduce the cpu usage dramatically. So its currently not a good idea to stretch long samples to short ones.

Posts: 1

Participants: 1

Read full topic

@Terumi wrote:

Hello people, I was wondering if there is an easy way to map an instrument phrases to the keyboard notes automatically, without having to drag and drop and resize the region for each one.

Thank you

Posts: 1

Participants: 1

Read full topic

@KnownUn wrote:

Whats up! Feelin’ the friday?

Whats you plans?

I’m trying to setup the best possible way to have the Digitakt conquer VCV Rack, first attempt:

PEACE!

Posts: 1

Participants: 1

Read full topic

@longhorn wrote:

Highlighted Block

Hi, does anyone know if it is possible to just mute a specific block of lines like in the image, I dont wan’t to cut it cos I might want to use that part at a later time.

PS: I have another question if anyone happens to know: In Sampler>Waveform>Interpolate option, Interpolate is turned off by default. What is the difference between this and enabling it but selecting ‘None’

Thanks!

Posts: 1

Participants: 1

Read full topic

@Sparky wrote:

Hi. I’m writing some code to convert my module format into XRNS. Does Renoise have a debug log that can be enabled at all?

Renoise is crashing when trying to load my XRNS file. It works fine when I produce a dummy/new tune XRNS. I’ve been doing a number of comparisons trying to make my file identical to what Renoise would (my file has different patterns and notes at the moment).

Just wondering if there’s anything I can look at or enable to help me work out what the offending XML element is?

Here’s a example of XRNS file I’m trying to load.
TestWrite.xrns (4.1 KB)

Posts: 1

Participants: 1

Read full topic

@Keisuke wrote:

Which of the following is the Renoise plugin standard?
VST, AudioUnits, AAX,
Please tell me.

Posts: 3

Participants: 2

Read full topic

@taktik wrote:

Another little bug (R3.2.1 b1, W10):

Remember also that there is a small bug in the operation of the “Flip button” in the Automation Editor. In case you want to solve it for this new version:

The problem: when flip (horizontal), it should also appear curved. The point that defines the curve is lost.

Splitting this out of ⮚ Renoise 3.2.1 & Redux 1.1.1 betas released so it doesn’t get lost…

Posts: 1

Participants: 1

Read full topic

@babaakbaralikhanji12 wrote:

+91-9116334052 {Nagpur} Online Vashikaran solution Baba Ji +91-9116334052 {Nagpur} Online Vashikaran solution Baba Ji +91-9116334052 {Nagpur} Online Vashikaran solution Baba Ji +91-9116334052 {Nagpur} Online Vashikaran solution Baba Ji

Posts: 1

Participants: 1

Read full topic