Forum

Hi,

I just wanted to make a longer recording with the loopback function of my sound card (Focusrite 2i2 4th Gen).

After about 4 hours of recording without an error message, I stopped the recording (clicked on “Stop” and “Done”). The waveform that was subsequently displayed in the sample editor was only 46 minutes and 36 seconds long. The temporary file %LOCALAPPDATA%\Temp\Renoise-0-17240\Renoise_TmpPath-0-0\TempSampleRef1.wav was about 5 GB in size.

Maybe it has something to do with size limitations of WAV files, but it would be helpful if the maximum recording duration was displayed before recording or a warning message could be displayed as soon as the maximum is reached. Alternatively, perhaps the temporary WAV file could be distributed over several temporary files once the maximum size has been reached, so that longer recording times would be possible?

Best regards

1 post - 1 participant

Read full topic

Hi everyone!

I’d love to hear your thoughts on an idea for a simple tool designed to help musicians get past creative blocks while working on a track.

The idea isn’t to generate something from scratch, but to build on what’s already there — like one or two notes, a short phrase, or a pattern.

Think of it as a kind of creative support tool — it takes existing material and offers possible continuations based on simple, intuitive transformations: repeat, transpose, shift rhythm, insert a pause, and so on. Nothing overly complex — just enough to help get the flow going again.

What I’d love to hear from you is: what kinds of transformations or logic would you find useful in this kind of tool? What would help you personally when you’re stuck?

At the moment I am collecting information to formulate the technical task and how it could be implemented. I would be glad to hear any thoughts, even strange ones.

Have a great day!

1 post - 1 participant

Read full topic

Hello,

This is a new track with Renoise and VST from Roland + Arturia Minibrut, pigment and AcidV.
Guitar by a friend : Pablo

Intro is hard rock, arpeggio 8-bit, next is solo guitar and electronic/demoscene for finish

Good Listening !

2 posts - 2 participants

Read full topic

Renoise 3.4.4, Windows 10 64-bit.

I have been getting frequent crashes with both Redux and Renoise in the past year or two. Usually they just close instantly without any error messages in the GUI or log file, but this one provided an error message and crash backup file.

It occurred as I pressed Ctrl+S to save the project. I took a screenshot to show the state of Renoise when the crash happened. SPAN was the only VST loaded and its GUI was not open.

Here is the log file:
Log.txt (1.4 MB)

Here is a link to the crash backup XRNS:

drive.google.com 250419 gTarPadShop_4_19_2025__18_40_crash.xrns

Google Drive file.

My system specs:

Operating System: Windows 10 Home 64-bit (10.0, Build 19045) (19041.vb_release.191206-1406) Processor: Intel(R) Core™ i7-4770 CPU @ 3.40GHz (8 CPUs), ~3.4GHz Memory: 8192MB RAM DirectX Version: DirectX 12 User DPI Setting: 96 DPI (100 percent) DirectX Database Version: 1.0.8 Graphics: Card name: Intel(R) HD Graphics 4600 Display Memory: 2160 MB Dedicated Memory: 112 MB Shared Memory: 2048 MB Current Mode: 1366 x 768 (32 bit) (60Hz)

PS: A crash that I reported previously has some similarities to this one. They both have a GUI Exception and this crash also involves note-off layers (used in instrument 00):

Sampler note-off layer crash Help, Support & Bugs In the “Samples” area of the Sampler (with the “Samples” area in focus/selected): Renoise crashes when I attempt to paste samples into a “note-off layer” or “note-on layer”. [layer_Crash] This is the error: A fatal error or crash occurred (unhandled exception in thread: GUI). System specs: Renoise 3.2.1 (64-bit) Windows 10 (64-bit)

1 post - 1 participant

Read full topic

How can I even chain VSTs together?

1 post - 1 participant

Read full topic

I have multiple rows of patterns in the pattern sequence matrix and a plugin (battalion) invoked somewhere in the middle. However the plugin plays from the first to the last pattern without the plugins instruments even mentioned in any of these patterns.
“The plugin always plays”! How can I stop that?

1 post - 1 participant

Read full topic

I always wondered what exactly GUI effects is doing when being enabled. I don’t see any difference with GUI effects being turned on or off:

from the manual:

GUI effects & animations: When enabled, animations will be used in some parts of the interface, e.g. smooth scrolling, fading of menus, transparency etc. Disable this option if you dislike them or are using a very slow computer.

Maybe it does not work on Linux?

1 post - 1 participant

Read full topic

Septha Works (VCV Rack) - Enjoying the free Sickozell collection.

Septha Works 01 (VCV Rack)

Have a great easter fam!

1 post - 1 participant

Read full topic

Hello, I am trying Cubase a bit… But there are questions. Last time I used Cubase was with SX2 or so, maybe 10+ years ago?

Some (also annoying) stuff seems to be still the same, but I wonder if there are new features, also I completely forgot how to properly configure Cubase.

So I have a bunch of questions, maybe you know how to solve these?

1. I would like the position cursor to jump back to the position where I started, once I am stopping playback. So far I only found some wonky solution, pressing 0 of the numpad… Doesn’t work properly though.
2. Is there a way to make the midi clips in the arranger a bit transparent, so I can actually see the gridlines though it?
3. So weird, there does not seem to be any pinch-to-zoom support. This just feels completely wrong, but is there maybe a hidden-in-the-menus way?
4. Any idea how to export projects so the will properly load in Studio One?
5. Can I somehow non-destructively transpose whole tracks? I remember this was possible back in the days…
6. Can I set the pianoroll to auto-perfectly-zoom-in the selected midi-clip? Or even better, show four bars always or so.
7. How do I macos-fullscreen Cubase, so it will be opened on a second virtual desktop?

So far I don’t really get why somebody should use Cubase over Studio One… Maybe it’s the MIDI part of Cubase?

The onboard channel dsp though sounds quite good, and quickly leads to good-enough results.

Thanks for any insights.

1 post - 1 participant

Read full topic

Is there any reason for the empty space above the beginning of the tracks? Never thought about it, but it seems a little waste of space.

2 posts - 2 participants

Read full topic

Hi!

A small request to add the ability to enable this mode via a hotkey

This has been bothering me for a very long time.

thank you!

2 posts - 1 participant

Read full topic

Simply an additional mode in which the back layer in the analyzer is filled, but the the front layer only is curve/outline drawn. I think this would quite a lot improve readability. The front layer however sould be drawn more fatty, and maybe be red always?

I don’t think colors of the tracks / the rainbow make a lot of sense in outline drawing mode at all… Especially when using retina / hidpi, it is then often barely visible at all.

So an option “fatten and redden the outline mode”, too.

What about a “monochromic” drawing in this combined mode, background layer is filled with track color, and the front layer is invert-masked on top, so black on the background layer, but the same color on black? And then quite fat?

btw. happy Easter!

1 post - 1 participant

Read full topic

Hey Folks!

I’m creating this thread as a living collection of ideas and suggestions aimed at improving the Renoise interface. Over years of use, I’ve developed certain workflows, as well as run into recurring friction points that often require workarounds or extra attention.

The focus here isn’t on radical redesigns, but rather on targeted enhancements that could make the interface clearer, faster, and more comfortable — without compromising the tracker philosophy.

I’ll be posting thoughts and mockups as they come. Anyone is welcome to join in — feel free to share your own observations or expand on the ideas below.

my first 5 cent

1. Optimized Effect/Processor Selection

The idea is to streamline the effect/processor selection interface: more compact, visually clear, and faster to use.

2. Combined Automation + Oscilloscope View

This concept integrates the automation editor with an oscilloscope — something I have wished for in Renoise for a long time.

The goal is to visually align automation changes with the actual waveform , in real-time.

This would be especially useful for working with short percussive elements, filter modulations, or any parameter-sensitive material — allowing for more accurate keyframe placement and easier fine-tuning of behavior.

It bridges the gap between what we “draw” and what we “hear”, making sound shaping more precise and intuitive.

any things!? ))

1 post - 1 participant

Read full topic

Greetings!

I found a strange bug with the VST3 version of the plugin when trying to bind parameters in the new version of the Instrument Automation plugin. Some parameters of the first MIDI channel of the microtonic are missing from the list. In other versions, everything works fine. I also checked in Bitwig, maybe this is a plugin error, but everything is fine there.

UPD
I tried with the same settings in bitwig, there is also such a problem. Probably it is a microtonic error

3 posts - 2 participants

Read full topic

When I open Serum 2 (synth or fx instance) and play notes with keyboard or midi device, Renoise starts lagging. Fps drops to single digits and audio playback has serious lag and some of the faster notes gets ignored.

If I close Serum 2 gui there are no problems.

If I set buffer size to 1024 the lag from Serum 2 disappears. Also I can use Serum 2 on Reaper just fine.

Using Windows 10.

These settings have no effect:

• Scaling for the display 100%/125%
• Disabling 2nd monitor and applying its scaling to 100%
• Setting “Let windows try to fix apps so they’re not blurry” on/off
• Audio ASIO/directsound
• Any gaming overlays are disabled
• Windows 10 and Renoise DAW have latest updates
• GPU and ASIO drivers have latest updates

CPU usage stays under 6% in Renoise monitor and from task manager cpu utilisation stays on 3-4% no matter if the gui is open or not.

1 post - 1 participant

Read full topic

Description:

I can right drag the pattern length if the first track is not collapsed. If the first track is collapsed, I can’t right drag the pattern length.

Steps to reproduce:

1. Launch Renoise
2. Collapse first track
3. Right drag pattern length

Expected results:

Pattern length increases by 10.

Actual results:

Pattern length doesn’t increase.

Video:

1 post - 1 participant

Read full topic

Vintage - Proudly Made Using Renoise

1 post - 1 participant

Read full topic

Sometimes when the system reboots or crashes while Renoise is running, KeyBindings.xml gets corrupted (not fully written to disk).
When I restart Renoise I get the message “Failed to parse KeyBindings.xml”.
So basically all my custom keybindings are lost.

To prevent this from happening again I set the immutable flag (chattr +i KeyBindings.xml)
But now Renoise complains on every exit that it cannot wtrite to KeyBindings.xml.

Is it possible to handle this situation more gracefully?
Thank you!

PS:
I just realised that there is a related issue from ~13 years ago:

Osx:quitting Renoise When Disk=Full = Keybindings.xml Destroyed Help, Support & Bugs Just got a Renoise: Failed to parse the XML file ‘/Users/xxx/Library/Preferences/Renoise/V2.7.2/KeyBindings.xml’! Notification from Renoise. So, when a non-saved song is quit with Renoise, the KeyBindings.xml will be trashed if the disk is full. While this will better remind me to create KeyBindings.xml backups, I’d really rather not see my shortcuts trashed just because I ran out of diskspace…

2 posts - 2 participants

Read full topic

Miss me? Been awhile eh? This song was technically suppose to be submitted in Puru's Snow White Remix competition ages ago (Puru – Swr) but wasn't up to snuff. As a matter of fact, the song had to go through revision multiple times over the past 5 years because it sounded horrible. Thus gets the "Redo" designation. One last thing: Puru please reply to my email when you have a chance.

1 post - 1 participant

Read full topic

Incorrect Reset Value Sent To LFO In Points Mode

When in Points mode and a value is sent to the Reset (either through effect commands, meta device or the API), the full range of the envelope is not taken into account. In this example, each of the points should be hit with the first five values, but this can’t happen since the end of the envelope is at CC instead of FF. The correct behaviour occurs for Lines and Curves modes.

1 post - 1 participant

Read full topic