Forum

I am trying to setup Renoise to work with Expert Sleepers Silent Way plugins and hardware to generate MIDI and CV signals going out to my Eurorack and MIDI hardware synths. In order to work, the fader level must be set to a perfect 0.0 dB level in order to drive the Expert Sleepers hardware correctly. I have tried setting the headroom setting to zero and then the fader on the track at zero, but it doesn’t work. I know that in other DAWs the way pan is implemented can also affect the output level in a way that trips up Expert Sleepers hardware.

Any member here with experience on this who can share some advice?

Thanks a lot and happy/healthy 2022!

Dado

1 post - 1 participant

Read full topic

HI, is there a way to play the notes on the row when u move to it automatically? like i want the playhead to follow the cursor and play whatever under it every time i move. I know i can move and then press Enter to do it but i THINK i’ve seen someone on you tube doing it without pressing the enter key, maybe i’m wrong…

1 post - 1 participant

Read full topic

Hello,

Is there a shortcut to invert the current selection? For Example, if I had the following rows highlighted…

C00 – B00

C00 – S04

press shortcut

C00 – S04

C00 – B00

Is that possible?

1 post - 1 participant

Read full topic

Hi. I’ve fallen in love with the Polyend Tracker, and composing with it is a breeze. I just recently got an idea, that to “expand” the tracking realm, I could do all drum sequencing with Polyend and the melodic side would be layed on Renoise, hence the vsti and wide columns to play chords with virtual synths/synths.

So, I installed (for the first time in many years) latesta Renoise installer. I have Apple Mac Mini M1, so I already knew, that there might be some issues with the *OSX 64bit INTEL installer". At first, everything looked fine. On launch of Renoise, the ReWire asked permission to open, but other than that everthing seemed just fine.

So, I hooked the Midi side of things immediately. I found polyend tracker in both, midi in and midi out from preferences. With a few clicks I was able to use Renoise as a slave to Polyend. It felt absolutely sweet!

After 30 minutes or so, the midi con between the Polyend and Renoise dissappeared. Just out of the blue. It doesn’t show on midi prefs, nada. I tried even re-install Renoise, and nothing. I swear I didnät change anything from settings neither with Tracker or Renoise. I also tested midi with Apples’ midi studio and Reaper, and midi is working just fine. So I figured it has got to be the ReWire? It seems that it doesn’t ask me to confirm “the use of ReWire” on each startup. So I guess this has something to do with ReWire?

If someone could help me out here, it would be more than sweet. In those 30 minutes when things were rolling, I was super happy with laying some drums in the Tracker and entering notes with the Tracker to Renoise tracks - and I could use sync, so that each time I press ‘play’ on Polyend Tracker, Renoise starts running. And there were 0 issues with latency, so I already saw some real potential here!

Cheers,

Sakke

1 post - 1 participant

Read full topic

I have just installed OBS as I want to take some videos of my tracks in Renoise.

I can record the screen fine but I can’t find a way to record the audio. I can record desktop audio fine if it’s coming from somewhere else (Browser, Spotify, etc.) but it won’t record any audio from Renoise.

I am running a JACK client and use a Scarlett 2i2 audio interface.

Is there anyone here experienced with OBS that knows how to fix this?

1 post - 1 participant

Read full topic

Any Renoisers contributing to the bi-yearly weeklybeats project starting again? https://weeklybeats.com/

FAQ; Help & FAQ (Page 1) - Site Help - Forums - WeeklyBeats.com

"Weeklybeats Members will be allowed to upload 1 song per each week of the year. At the end of the week the upload counter on the home page will restart and all submissions from the previous week will become available for listening and downloading. Members are encouraged to create a new unreleased song for each given week (of course you may submit your song elsewhere as you hold all rights to your content, but it spoils the fun if you release it before hand!)

The objective of Weeklybeats is to encourage musicians to be productive, creative, and have fun!"

1 post - 1 participant

Read full topic

Hi all, just getting into Renoise as a previous user of Ableton.

I’m trying to get the Renoise FX to sound through my audio interface/mixer. I have a Roland MX1 which is an interface/mixer in one. I have no issues with it being the master clock and all the MIDI is working fine, but the audio output from the MX1 doesn’t seem to be going into Renoise as none of the Renoise monitors are firing. And because of this, the effects aren’t working either.

I’ve set my audio settings up correctly I think, and played around with the output settings on the MX1 but nothing. Ableton says to set the MX1 up in ‘External’ mode which works, but when I do this in Renoise, no sound whatsoever. Think theres a routing issue…

Any ideas?

1 post - 1 participant

Read full topic

Ok… I’m really falling in love with Renoise’s effect commands (only took me ten years or so to properly appreciate them!)

But… I can’t get anything impressive out of the 0Axx command…

Can any of you show me something impressive you’ve done with I?

Perhaps it’s just not to my taste!

2 posts - 2 participants

Read full topic

hi :

Hack The Planet - Bz Akira Santjago from snowcrashproject on Vimeo . Questa Videomusica è dedicata alla mia compagna Rita Cavallaro...

Bz

1 post - 1 participant

Read full topic

The lead instrument starting at 00:03 in revontuli | laamaa sounds like it repeatedly triggers notes while speeding up and slowing down (in addition to other things, like pitching up/down and reverse or offset).

I thought I could do this in Renoise, but so far I haven’t had any luck with the timing of the notes. My first thought was to use 0Rx and 0Rxy―but those only work per beat. I don’t know of any way to speed up or slow down notes over several beats in a single track/phrase, at least not how the reference song sounds.

The reference song was created with another tracker (the Dirtywave M8). Are there some simple tracker techniques I’ve missed in Renoise that can also produce this effect?

1 post - 1 participant

Read full topic

I’ve been trying to Rewire Renoise into Ableton to use the functionalities of Ableton alongside the tracker style. For some reason, even though I’m opening Ableton first, waiting and then opening Renoise, it asks for the password for the Mac profile to enable rewire but it never goes into rewire mode.

What can I do?

1 post - 1 participant

Read full topic

Hello and happy new year!

So, i have a track which controls a vst instrument. At the same time there’s a vst fx on that track which needs to receive the same midi data(midi triggers specifically). So far i’ve figured only way: to create an Alias of that vst fx and send a duplicate of the midi data to it. Is there a way to avoid this? Thanks!

1 post - 1 participant

Read full topic

I brought my SP404sx to a friend’s house and he plugged it into his focusrite scarlett amp (same one as mine) and hooked up a guitar cable to the sampler (that’s just what I call the cable, can’t remember the exact name) and was able to play notes in Logic without any extra setup. I picked up a guitar cable today and routed it to the the guitar port with the cable and plugged it into the phones jack on the SP404sx hoping that it’d work seamlessly with renoise, but it doesn’t detect it on the program.

I have the settings correctly in renoise to pick up and record sounds into renoise from the sampler. When I play notes from the sampler the light on the the guitar knob on my amp turns flashes from green to red continuously and while the sound works perfectly with headphones/cable plugged in, I can’t get the samples to record directly into the program. I’m still sort of a noob to using hardware with software, so any help would be highly appreciated, thanks. The picture attached shows my current setup.

1 post - 1 participant

Read full topic

I’m stupid and can’t figure out some things from reading the manual and looking online.

I’m hoping to post some questions here about it if anyone has one and understands it better than I.

1 post - 1 participant

Read full topic

I’m sure, this is something I can finish

Hör dir Movietrack2 von trancefish_de an auf #SoundCloud

1 post - 1 participant

Read full topic

Please like and share this track! <3

Thanks for listening!
Daniel

1 post - 1 participant

Read full topic

This is my first time installing Renoise and after hours of experimenting and research i just can’t get any sound to be output.

I couldn’t get it working with bare ALSA, so i installed QjackCTL and started that server and selected jack as the output device, to no avail. I followed the instructions to install and run Qjack properly, but i don’t feel confident that it’s actually installed correctly.

Through all my experiments, i kept a demo song playing, and Renoise displays (what i assume is) the output audio on the graph as normal, so it seems that my audio is working fine from Renoise’s perspective.

Does anyone have any tips for diagnosing this issue? I would settle for getting this to work with either ALSA or jack for now, even if it’s high latency… I just want output.

1 post - 1 participant

Read full topic

"Welcome to the Yellowstone sound library, where you can immerse yourself in the aural landscape of America’s first national park. The files available here were recorded in the park and are in the public domain. "

1 post - 1 participant

Read full topic

Hi.
Totally new to Renoise. I have two tracks sending notes to the same instrument(multichannel drum machine). 1st track triggers kick, 2nd triggers hi hat. Weird thing is that kick triggers only when there is a trigger for hi hat as well. If i swap the tracks order in Renoise edit window then it’s other way around…how do i fix this? Thanks!

2 posts - 2 participants

Read full topic

Is there any way to declare static variables that persist between cycles in the formula device? I’m working on implementing chaotic attractors for modulation, and being able to store variables internally would make things a lot easier.

Additionally, if there is a way to do it, what scope do the variables live at? Are they global and able to be referenced by code in other instances of Formula, or are they private and completely sandboxed to the specific device?

Thanks in advance!

1 post - 1 participant

Read full topic