Feed aggregator

@whisp wrote:

Hi!

I’ve recently bought a new PC with an i7-8700k. It has 6 cores, 12 logical processors, which show as 12 cores/CPUs in Renoise.

The thing is: Songs i created with my 8 years old PC don’t run anymore on the new rig, due to the engine stopping “because it used too much CPU for quite a long time.”

When i check the CPU usage in the task-manager parallely, it stays at around 15% total, compared to Renoise’s 90%+ usage.

Obviously Renoise fails to use the cores for some reason.

I’ve tried it with different amount of cores set in Renoise, it didn’t help. And disabled overload prevention, and got no more message, but the song started stuttering at 99.9% usage.

I don’t know what else i could try. Any help is appreciated.

Kind regards,
Mario

Posts: 1

Participants: 1

Read full topic

@Raul wrote:

What would be the cleanest way to limit the volume of a track so that the instrument did not exceed the highest volume set, without the final sound of the track (its texture) changing too much?

That is, only recotar the highest peaks without influencing the rest of the sound along the track, with the condition that the resulting sound is as close to the real as possible.

What concrete configuration in the track’s DSP (Dynamics Devices) should I use?

Posts: 1

Participants: 1

Read full topic

@RiDylan wrote:

Ey guys I dropped an EP. 100% Renoise. Enjoy.

https://cockrockdisco.bandcamp.com/album/micro-ep

… Swag

Posts: 1

Participants: 1

Read full topic

@fredeke wrote:

Hello.

My Renoise version is 3.1.1 (build Feb 6 2017), and my soundcard is a 64-channel RME HDSPe MADI.

I’d like to route each Renoise track to a different output, in order to mix my songs in an analog mixer. However, in each track’s output menu (as well as the master track’s), only the first two channels are available. This menu used to offer all 32 stereo pairs as possible outputs, but now it only shows channels 1 and 2 as one sole stereo output.

Same problem with the inputs (though that I could live with) : only the first two inputs appear in Renoise, where all 64 used to.

I don’t know what has changed in my config. Other DAWs like Reaper still see all the ins and outs, and I am still using the ASIO engine in Renoise (I didn’t switch to DirectSound). Also, RME’s mixer util is in “DAW” mode, which means it is bypassed, and supposedly not messing with routing.

Does anyone know what could be the problem ?
Please help, I am stuck.

Thanks

Posts: 1

Participants: 1

Read full topic

@Ghost_Train wrote:

I’m just trying to learn the different commands and trick here. I am trying to figure out how to fade out a sample with no success yet.

The Effects Commands reference card shows
Oxx - FadeOut - xx = amount in steps of 1/256,00 = repeat.

I’ve tried both O01 and O256 in the FX column on the step the sample is triggered and any steps after.
I’ve tried repeating the same command on every step. The sample remains unaffected and continues to play out as normal.

What is the trick to make fades work?

Posts: 1

Participants: 1

Read full topic

@Garth_Knight wrote:

I thought I managed to work this out but cannot for the life of me remember …

I am trying to do 6/8 at 80 bpm ( I do mostly epic trailer music)

I need to be able to do 8th and 16th notes without messing with the lpb during the tune

Please can you help!!

Posts: 1

Participants: 1

Read full topic

@cupcake wrote:

Hi, this is a simple tool i started years ago to just count the number of lines selected in the pattern and display the result in the status bar. It was intended to be of use when playing in notes ‘rubato’ style, and helping to line stuff up. I think i intended to use the count to set the correct BPM eventually, but never got around to that part yet. I have cleaned up the code and commented it. There’s probably some redundancy in there, but it works quite well.

The next step for this tool is to add a menu entry and some options, like setting display time-out, an enable switch, and an offset timer to allow other status messages to display first, because as it is it interferes with other tools’ use of the status bar to show messages.

I might also add some kind of option to change the edit step based on the selected number of lines, as that could make it more useful perhaps.

Ok,byebye.

greasy.cupcake.LineCounter.xrnx (2.3 KB)

Posts: 2

Participants: 2

Read full topic

@Dry_Eyes wrote:

It’s just raining 14 minute EPs by Dry Eyes here (maybe time for a full-length so I don’t clog your board, eh?) More drum n drone with a lot going on at one time.and yet quite a bit of variety. Ridiculously expansive tribal drumming, interesting harmony. All things Emanate from the Nameless!

Posts: 1

Participants: 1

Read full topic

@milkyheart wrote:

i took my sweet time in polishing this, it’s finally ready.

14 minutes of dreamy & distorted drums.

Posts: 1

Participants: 1

Read full topic

@SyneRyder wrote:

Has anyone got Waves v10 plugins working with Renoise 3.1.1 64-bit on Windows 10?

I can get AudioTrack & Bass Rider to load, but Renoise seems to crash once it tries scanning Bass Slapper (which is a virtual instrument, not an effect). None of the other Waves plugins are showing up. My Waves plugins work fine on Renoise 3.1.1 Mac with High Sierra 10.13, but I’m trying to move to Windows.

I’ve tried deleting the VST caches & CrashedVST caches & rescanning, but that hasn’t worked. I’ve also tried the shell2vst trick to make Waves plugins work, but shell2vst also stops at the Bass Slapper VST instrument. I’m just left with “hell3-VST 10.0_x64” and “hell4-VST 10.0_x64” in my effects list. Moving the “Bass Slapper.bundle” or removing my Bass Slapper license & rescanning didn’t help either.

(For what it’s worth, Cantabile Lite doesn’t load Bass Slapper or any other plugins after it either, so I guess this is really a Waves problem… but I thought I’d try asking here first.)

Posts: 1

Participants: 1

Read full topic

@luisaguirre wrote:

Is there a way to import pieces or an external Renoise song file into an open Renoise song file? I have a sequence from another file I’d like to add to the song I’m working on. Is there an easy way of doing this that I haven’t discoverd?

Posts: 1

Participants: 1

Read full topic

@Chris_Edberg wrote:

I’m using only Focus Next View and Focus Previous View (I find it more useful than to map a unique key for every view for my workflow).

However, once the keyboard focus get to the window of Plug-In effects, it remains there. More specifically, it jumps between the box and the search field. You have to mouse-click in another view to reset.

Is this a bug, or what am I doing wrong?

Posts: 1

Participants: 1

Read full topic

@midierror wrote:

The nudge feature is useful for shimmying notes around, but you tend to lose notes from the top to bottom - is it possible to have the notes be nudged from the end of a pattern round back to the beginning - and vice versa?

so if a pattern is 64 steps, and you nudge down, the notes on step 64 become notes on step 1

Posts: 1

Participants: 1

Read full topic

@ipm wrote:

Hi,

Is there any way that I can record into directly Redux via my interface instead of sidechaining audio into it? Like how it works in Renoise but I don’t see any Audio Preferences in redux ):

Cheers!

Posts: 1

Participants: 1

Read full topic

@Land_of_Bits wrote:

hi crew i started this one the other day in my twitch stream
most of the arrangement was done in Renoise but after that i bounce and finished the rest in Fl
hope you like it
this is my 1st renoise song in 2019

Posts: 1

Participants: 1

Read full topic

@taktik wrote:

(Replace this first paragraph with a brief description of your new category. This guidance will appear in the category selection area, so try to keep it below 200 characters.)

Use the following paragraphs for a longer description, or to establish category guidelines or rules:

• Why should people use this category? What is it for?

• How exactly is this different than the other categories we already have?

• What should topics in this category generally contain?

• Do we need this category? Can we merge with another category, or subcategory?

Posts: 1

Participants: 1

Read full topic

@PPLo wrote:

Hi guys!

This is an old track from me. Was supposed to be released by a label… It never happened so I decided to release it myself!

Enjoy!

Posts: 1

Participants: 1

Read full topic

@luisaguirre wrote:

I’m having a hard time figuring this out. Doesn’t help that I’m kind of noob at routing and midi. I have my Minilogue routed via USB and playing nicely with Renoise. I can record and playback. I can hear my minilogue playing fine. But when I go to export the track the minilogue is no longer audible. I’ve messed with changing the output in preferences and under the midi tab to no avail. I’m sure I’ve missed something but I can’t figure out what it is. Thanks for taking the time to read this.

Posts: 1

Participants: 1

Read full topic

@teller wrote:

How can I set MSB 87 in Renoise so that I can change and switch Banks and Patch Numbers.
Roland says MSB needs to be set to 87.
Roland Corporation D-05: Program Change Numbers (MSB LSB PC)

* The Patches corresponding to each Bank Select are as follows.   PATCH NUMBER   

Posts: 1

Participants: 1

Read full topic

@orrigans wrote:

I love the cabinet sim effect and I’ve always wondered what cabinets they’re actually modeled on. Some of them are obvious from their names, but I have no idea what “All Classic” or “Breakdown” is supposed to be, for example.

Not a terribly important question I guess, just curious.

Posts: 1

Participants: 1

Read full topic