Renoise Forum

I think I am going to make a Tech Step track.

Some comments before. I think it would be better to have an 18dB filter only, to simplify things. (One does not need confusion in choice here.) Also the old school hex command input, should be replaced by automation curves. A general tightening up of the tracker interface possibly. Not so many Oscilloscopes, two (stereo) is enough.

Tech Step also is a tightening up of Trance. One grew tired of phasey trackeq+mastereq+multiband sound a long time ago. This tries for a subband saturation only, over Low ratio compression if any, to clip sound.

Anyone else into Tech Step?

P&L

10 posts - 2 participants

Read full topic

Hey all,

Here is a doofer I made inspired by a renoise student’s lesson. It is an LPC synced 4 track live looping doofer that allows for line input (microphone) or looping of any audio stream that you insert it into.

Macros are as follows:

Macro 1: input select “ø,1,2,3,4” determines which tap of the mtdelay unit is being used for audio buffering. ø is no input to the looper. This honestly isn’t super useful in this iteration of the looper, but in a future version I will allow for more creative control of individual inputs/“tracks”
But it does allow you to bypass looper recording when set to ø, so you can jam over your loops

Macro 2:“on>mute” This mutes the output of the looper without clearing the recording buffer

Macro 3: “clear/kill” this clears the recording buffer whenever this macro is moved. All recorded audio is deleted, never to return

Macro 4: “sync LPC” This controls the loop rate in multiples of 2 LPC. 2, 4, 8, 16, 32, 64, 128, and 255 LPC are all available. 255 may not be that useful lol

Macro 5: “FB” controls the feedback level on all delay taps/buffers simultaneously. Allows for negative feedback values as well. Perhaps you don’t want a true looper, but only a long delay. Use this one. Otherwise set and forget at max value for 100% FB

Macro 6: “LP freq” The taps all have LP filtering enabled. this sets the cutoff frequency for all taps simultaneously. Offering further sound sculpting possibility if used as a long delay unit. Otherwise set and forget at max value.

Macro 7: “line input” This is a simple switch which enables a line input device for recording from external audio input into the looper. Of course, you will need to set up your recording preferences accordingly

Hope this is useful to some of you out there. Let me know if it gets some use, and I’d love to hear any live looping renoise jams you come up with.

I will probably make an improved version of this sometime. Or maybe not. Life is full

4 track live looper proto.xrdp (44.9 KB)

5 posts - 4 participants

Read full topic

Hi, everyone.

This is my first super simple Renoise LUA tool.

It automatically calculates time divisions in miliseconds and hertz for the current BPM.

I made it mostly as a reference chart for my VCV Rack patches but also to set up release times for some synthesizers and even compressors.

Thanks to @esaruoho for helping me with the table formatting and providing some LUA instructions for my newbie *ss.

You can assign a keybind to open the window (I recommend Shift+ ’ to be close to the metronome, which is ').

Feel free to modify and do whatever you want to the tool, just post here so everyone can benefit from it.

Download HERE

Some ideas for the future:

• Add buttons to multiply/divide/offset time divisions
• Quickly copy values by clicking on them

10 posts - 6 participants

Read full topic

Hi, Renoise seems to have an issue when automating program changes for VST3 plugins. I am trying to get Korg’s modwave & wavestate native plugins change the current patch for a live performance. Their manual says:

.

Renoise cooperates well when changing the program from the Plugin page:

But unfortunately it doesn’t work when using Intr. MIDI Control device, M2 command or sending a program change MIDI message from my controller.

Since Renoise is already able to change the program when selecting from the Plugin/Program UI, this seems more like a bug or incomplete feature to me. I don’t have any other VST3 plugin that accepts PC to try, but VST2 plugin program changes work as expected.

Would be really happy to have this working, let me know if I can provide more info.

3 posts - 2 participants

Read full topic

UPDATE
fixed the issue by disabling “auto rescan when hot plugging devies”
i noticed it was constantly scanning every 20 seconds or so and saying ‘found 4 input and 4 output midi devices’ at the bottom of the screen.
Now its playing 200 bpm breakcore with 10 channels no problems.
Thankyou for the help !

The audio is fine, there is no glitching or anything. Just that when i am playing a song with the 'follow' on, the scrolling freezes / hangs for a split second. It does it almost randomly, not at specific points or specific commands. Tried with slow and fast tempos and it still does it. I want to use the screen recording of the pattern editor mixed with my visuals so its kind of messing that up. Tried adjusting about everything GUI related, audio buffer etc, frame rate up and down made no difference......out of ideas. CPU is mostly at about 2 percent i doubt its that either. possibly a gremlin ? If anyone has any ideas i appreciate it. Wondered if anyone else had encountered such a problem ? cheers Tom

16 posts - 5 participants

Read full topic

Just found this on kvr audio , it’s awesome
An emulation of the jv-880 chipset + loads the original jv rom boards
The jv880 is the first rompler that could load the legendary sr-jv expansion cards
Go get the Roms before they dissapear , atm it’s just a sample playback machine but damn it sounds good .
Comparing it with my roland INtegra ( which all the srx cards build i ) , it sounds bloody awesome

VIRTUAL JV: Download, Installation, Firmware - FREE Roland JV-880 Emulator

github.com GitHub - giulioz/jv880_juce

Contribute to giulioz/jv880_juce development by creating an account on GitHub.

HOw to get roms explained in the video

25 posts - 6 participants

Read full topic

So let’s say you’re a (european) hobby musician and you would like to upload some of your music on Bandcamp for fun and to maybe get some additional small pocket money. Your real job is selling whatever online, for example on eBay or Amazon. Your real job and your hobby are two totally different businesses. So should you register as a trader or not? The description is pretty confusing:

Bandcamp Help Center Digital Services Act

The European Union (EU) Digital Services Act (DSA) is a new law designed to protect online consumers by regulating obligations of third-party marketplaces, such as Bandcamp. If you are interested i...

Does anyone here have experience with this?

10 posts - 4 participants

Read full topic

I’m curious to know if anyone has ever completed an orchestral track in Renoise before. All I’ve been seeing on YouTube is just jungle drum and bass. Not a dig at anyone making that kinda stuff; I like a bit a jungle myself :), but I feel like Renoise is powerful enough where you can do so much with it. This is a question that’s been burning into my conscience recently and I just want to get it out of the way. I’d like to know your responses, if I may.

3 posts - 3 participants

Read full topic

Brief description:
Gray sidebar appears when exiting fullscreen via Alt + green button on macOS. Also, the red/yellow/green window buttons are missing in fullscreen mode.

Steps to reproduce:

1. Launch Renoise on macOS
2. Enter fullscreen mode (e.g. via green window button or Control + Command + F)
3. Observe that the red, yellow, and green window buttons are not visible in fullscreen
4. Exit fullscreen
5. Hold Alt and click the green window button to make the window fill the screen (without entering fullscreen)
6. Observe the right edge of the window

Expected results:

• The three window buttons (red/yellow/green) should be visible in fullscreen, or hidden in a standard way depending on macOS behavior
• Alt-clicking the green button should expand Renoise to full window size with no visual glitches

Actual results:

• In fullscreen, the window buttons are not shown (no way to exit fullscreen with mouse)
• In windowed full-size mode (Alt + green button), a gray vertical bar appears on the right side

Description:
The gray bar only shows up when using the Alt + green button method in windowed mode. It does not appear in fullscreen. Also, in fullscreen mode, the absence of macOS window controls (close/minimize/maximize) makes exiting fullscreen less intuitive.

2 posts - 2 participants

Read full topic

Yaeltex Yaeltex // Hardware your way.

Custom MIDI controllers made in harmony between humans and machines in Buenos Aires, Argentina.

You can design your own hardware midi controller…And get it ready built

1 post - 1 participant

Read full topic

Hi! I can’t find the information, is there any way to move up or down notes only the ones in the selection area?

Thanks!

6 posts - 4 participants

Read full topic

Just let a “Thank you” to them…

And maybe more for Taktik…

(Credits: @DEVDESLPZ)

2 posts - 1 participant

Read full topic

Hi,

When I duplicate a row patterns, a # is added at the beginning of the name of the pattern, does anybody know if I can turn this off? I would just like to have the same name, or an empty field name, like in the source patterns I duplicated.

I’m always busy deleting the # after duplicating a row of patterns

Thanks

10 posts - 4 participants

Read full topic

There are some plugins that have XY values + a Touch parameter. Korg Kaoss Pad being one of the best examples. XY Pad seems visually shows that its receiving touch data (click and hold) but it would be amazing if that could also be assigned to a parameter on an additional Setup button. For Kaoss Pad that would be basically to turn the fx on and off, but seems like this could be used in any number of creative ways for any plugin.

14 posts - 3 participants

Read full topic

PIKOCORE XL sound demo

Erica Synths Pikocore

Introducing the limited edition Infinite Digits Pikocore XL DIY kit by Erica Synths!

Features

• a lo-fi music mangler based on the Raspberry Pi Pico (brother of the nyblcore).
• capable of holding 8 minutes of 8-bit 33 kHz monophonic samples.
• powered by a single alkaline AAA battery for up to 3 hours or by powered by USB-C.
• tempo-synced with a selectable BPM between 60 and 300, with samples mangled by beat-synced effects (stutter, retrig, gate, tunneling).
• loaded with real-time effects like a resonant filter, timestretching, volume, and wavefolding.
• sequenced with a 128-step sequencer with recording/playback
• saved and loaded via EEPROM for instant patch recall.
• able to load custom firmware, new samples, all through USB-C.
• sync-compatible with Pocket Operators.
• open-source, wonderfully hackable.

based on this device

160 Euro

2 posts - 2 participants

Read full topic

HI There’ New here¡

I was starting my journey here with Renoise and half of my plugins no matter if they are vst3 or 2 are not showing up.

All the plugins are original and activated just installed vst3 versions only and then after try all in Ableton but since they not showing up installed also vst2 with same luck. I Donny know why exactly are not showing up. All they are well installed and activated and working in other Daws.

I don, t want to use or try Au versions, even if I,m in Mac I don’t want lo lose compatibility now or in the future.

Here is the list:
Audiomodder riffer 3 no vst3 or 2

Serum 2 not showing only show serum fx

Woodland studio Wolsa bass no vst3 or 2

Surge synth team stochas no vst3 or 2

Algonaut atlas no vst3 or 2

Ilements drop the bass 01 no vst

Thanks in advance¡

9 posts - 4 participants

Read full topic

Hello everyone…

Could a chromecast work if controlled by a smartphone which also serve as an ‘internet box’ for the chromecast?

It’s for my mother…

Have a WIFI printer which doesn’t work like this

Thank you in advance…

4 posts - 2 participants

Read full topic

hi, anyone able to tell me what the connection between 0%-100% in Global Groove, and 00-FF in Delay Column is? how would i go about figuring this out?

1 post - 1 participant

Read full topic

so, i’m a bit thrown now, i don’t know where in Renoise is the menu entry “Phrase Mappings”.
i can of course map menu entries to Phrase Editor, or Phrase Grid. but what’s Phrase Mappings?

1 post - 1 participant

Read full topic

I have my sample collection on pCloud with a 100 Mbps download speed. When I load samples (do not have to be large) into Renoise, Renoise sometimes hangs and I have to kill it, because it does not recover by itself. Even after pressing “wait”. Same happens with Reaper.

Seems pCloud transfer is sometimes pretty slow. As a first solution I set the timeout value higher from 5 s to 30 s as described here via the dconf editor:

askubuntu.com How to increase waiting time for non responding programs? gnome, configuration, environment-variables asked by malhobayyeb on 04:44AM - 30 Jan 14 UTC

1 post - 1 participant

Read full topic