Renoise Forum

As the title says, when in record mode and playing a sample instrument with the keyboard, glide isn’t inserted into the live recording unless the sample fx column is visible. Is this intended and just something one must keep in mind if they want their performance to match what was recorded?

4 posts - 3 participants

Read full topic

So I’m trying to record my analog Rtym in renoise. I have my audio interface set as my in and out device in audio preferences. The clock and transport from renoise are being sent to the rytm so when I start a pattern in renoise it plays on the rtym. When I go the record button on the sample tab it doesn’t show an option on where I would like to receive the incoming audio, and although can be heard through the direct monitoring, nothing shows on the levels of the VU meter.

From looking on the manual and from what others have said there should be an input window on the record function. I’m on OSX

3 posts - 2 participants

Read full topic

I’ve been listening to the latest release from Spor and man, that things is nuts!

https://www.youtube.com/embed/uTivig60jDk

EDIT: I would just like to add something I noticed. I’ve been using YouTube Music to stream all of my music and the songs on there are considerably louder and more powerful. I just streamed this song (Let Me Be) back to back on regular YouTube and YouTube Music. There is a noticeable difference between the two and actually doesn’t sound that far off from my own mixes when just listening on regular YouTube. So maybe something to consider…

1 post - 1 participant

Read full topic

"Picked up this machine at a local garage sale. The owner said he picked up in the 90s and it was not working. Poking around and fixing the power board, it fired up and it turned out to be a tracker sampler. Looks very similar to a modern tracker?"

Est. reading time: 2 minutes

1 post - 1 participant

Read full topic

https://www.youtube.com/embed/oSEQh4G8r9Q

First load a song that contains samples, then copy some sample data into the clipboard. Pasting over part of a sample then undoing that works as normal. Pasting over the whole sample then undoing permanently deletes the whole waveform. Doing this to samples created or loaded in after the initial song load works fine.

Interestingly, this bug only applies to versions 2.8 and later. Previous versions will undo the pasting and restore the original waveform as normal.

1 post - 1 participant

Read full topic

https://youtu.be/oUrIb-H1HgQ

1 post - 1 participant

Read full topic

trying to delete my failed plugin cache

3 posts - 2 participants

Read full topic

Would be really really cool if Renoise was specifically adapted to the Steam Deck for on the go tracker-based beat-making

• UI mode adapted for small touch screens (could also be helpful for those on other handhelds (Raspberry based or GPD laptops)

• Steam Deck’s controls fully mapped to Renoise navigation, commands, composing, playing etc (could also be made compatible with Xbox/PS4/Switch game controllers)

• Performance optimisation if required for the Steam Deck’s OS and APU

• Make sure the installation is smooth and icon can be easily added on the Steam interface once installation is done.

I think such integration would bring Renoise a whole new experience and probably new public as well.

I personally haven’t invested on a Renoise licence yet but I’m receiving my Steam Deck in the coming days and I’ll probably test the demo of Renoise on it to see if it’s usable. From my short experience on the Demo on Mac, I believe it will probably need some stripped down UI to be usable on the Steam Deck’s screen.

I wonder if the physical controls send key stroke messages to the system that we could already map to Renoise, I will test and tell you if it is the case.

What do you think ? Would you use your Steam Deck as a tracker-based groovebox on the go or at home ?

4 posts - 4 participants

Read full topic

Been a while guys. Would be good to hear some feedback. Recently updated (Shift-f5 if you’ve already heard on soundcloud).

Currently rendering out videos for these.

3 posts - 1 participant

Read full topic

Hi,
Does anyone has experience in integrating renoise with polyend tracker?
In your opinion, what is the best controller for Renoise (meaning keeping your mouse away!)

1 post - 1 participant

Read full topic

Hey guys, I share this on Reddit and on my YouTube Channel But I might as well post it Up here. These are the two latest help guides I have made for Renoise!

Everything else is on my Google Drive:
https://drive.google.com/open?id=1jX-cUD5KZ67-sFHpVdM6OaI1P5HFvTqU&authuser=gdashwood1%40gmail.com&usp=drive_fs

1 post - 1 participant

Read full topic

Renoise 64bit - v3.4.2 (Apr 25 2022)
Windows 10 64bit Pro

I made some patterns. In the Pattern I inserted 4 blank patterns at the bottom to copy the first 4 onto.
For some reason only some of the blocks will copy but it refuses to copy beyond pattern block 9.
That particular block/track is just basic notes for a vst3 synth (Arturia CMI V) No automation or fx plugins
Select, Copy and Paste does not work. (Ctrl+C/Ctrl+v)
Select, Ctrl + Click & Drag does not work.
Dragging the bottom edge only works for a short some of the blank block but not the bottom section.

Here is a gif of what is happening (If the forum lets it play)

Seems like a bug.

I tried save, quit and restart. The problem persists.

One thing I noticed in the Instrument section is that vst for some reason shows “(ProgramChange1)”. Not sure if that has any significance here.

1 post - 1 participant

Read full topic

Renoise 64bit - v3.4.2 (Apr 25 2022)
Windows 10 64bit Pro

While editing a pattern with highthat samples i noticed the volume command was not working on an added column in a track. Thought maybe it was because of the Rxx command. vol stayed at 100%

I moved the samples over to the left and the volume command works again.

I tried adding a 3rd column and moving them to the right again. Same thing. Vol is ignored.

When I remove the Rxx commands, now Vol works on every added column

I also tried moving the Rxx commands to a second fx column and the samples to the second note column. Seems to make no difference. it only works when the notes are on the first column.

This seems like a bug, FX commands should work for the line regardless shouldn’t they?

1 post - 1 participant

Read full topic

Hello!

It seems that on my Win10 machine with Reaper 6.21. Redux v1.3.2 is not saving the global settings. E.g. I set the UI scaling and I always lose it.

I seem to recall opening a bug and providing detailed information, but now it seems I didn’t proceed.

What I was seeing was the Redux XML config file getting written when doing changes, but then when loading the VSTi dll the file is overwitten to its defaults for some reason.

Am I I the only one with this problem?

1 post - 1 participant

Read full topic

Hi Gang,
I realize that every time I open an older sample or instrument, I have to press “Upgrade Filters” in the modulation tab. Is there a way I can bulk upgrade all my instruments to the latest filters?

1 post - 1 participant

Read full topic

Seems like Steinberg dropped Rewire in Nuendo 12 and this is a part of my composition work flow for many projects.

One such option is Renoise as a VST - apparently this is the direction Reason went.

Is there any other solution to this problem?

I would support an upgrade fee to help with the development.

Cheers!

1 post - 1 participant

Read full topic

https://www.youtube.com/embed/jlDfH3TyuL8

This is most visible with a small amount of steps and affects all instances of graphical automation.

1 post - 1 participant

Read full topic

I made an instrument which crashes when you press a few notes at once (like pressing Q, W, and E at the same time on your keyboard).

To make it crash, I need to enable “Mono” on the instrument, set “Glide” to at least “G01” (not “Off”), and I need to put 12 modulation devices on it. It doesn’t seem to matter what kind of device―they could be 12 volume mod devices, or 12 pitch mod devices, or whatever.

https://cdn.discordapp.com/attachments/685720686517682201/991166300296581190/12_modulation_devices__Mono__G01_crash.xrns

I didn’t use any plugins.

1 post - 1 participant

Read full topic

I think that there’s probably some legit sounds that could be found within mathematical equations and whatnot.

https://www.youtube.com/embed/iSdRbFNEh8g

1 post - 1 participant

Read full topic

Hello all, I’m new to Renoise although I used to track on the Amiga and later using Buzz. However I have a real n00b question.

I’ve got two tracks both playing different notes on the same instrument, the SuperTriangle to be precise. I have a feeling that may matter somehow.

The notes on both pattern tracks are being output to a single audio track. So I am playing notes on both Track 01 and Track 02, but all the sound comes out of Track 02. This is getting in my way because I actually want to pan the tracks separately.

I suspect that the reason all audio is rendered in one place is because the instrument has an effect chain. So ReNoise is being clever and just running one effect chain instead of two. Kind of makes sense, but it isn’t what I want!

UPDATE: It gets weirder, because this only happens when the notes are simultaneous. If the notes are separate in time, ie not on the same row, then Track 01 and Track 02 start making separate sounds!

Have I done something crazy or is this default behaviour? If it’s the default, can I control/deactivate it?

1 post - 1 participant

Read full topic