Renoise Forum

Hello. I’m Mark Salud. I used to create music mods using the Amiga computer and OCTAMED. You may have seen my stuff in Aminet or any Amiga-related sites.

After a very long hiatus, I am back creating music again, I have used Renoise to create at least 36 songs, all uploaded in https://www.youtube.com/tvpmark

Last Saturday I was interviewed by Mad Wasp Radio about my musical journey. It will air tomorrow on MapWaspRadio.com if you’re interested.

3 posts - 2 participants

Read full topic

What is the best way to use swing in renoise on a vst?
So not on a sample but triggering a vst?
Are there any good plugins for this that add swing inside the track/pattern.
Without changing speed using the codes.

Thank you for your help.

4 posts - 4 participants

Read full topic

This is my first completed song using the KORG M1 VST plugin.
Using presets only!
These good old warm presets is just like going back to the old Soundtracker days 30+ years ago

https://soundcloud.com/jvedels/korg-m1-test-01?si=c367ff58629d4640a15d364cf7665bd8&utm_source=clipboard&utm_medium=text&utm_campaign=social_sharing

1 post - 1 participant

Read full topic

I’ve noticed this with the latest version that after opening Renoise, the favorites list in the plugins dropdown is not there sometimes, but when I close Renoise and open it again, then it is. Anyone else?

1 post - 1 participant

Read full topic

Hello,
I have a few functions that belong to the class.
I want to have these in a table from which I will use the value to select a stored function that I will then run.
Unfortunately, this does not work in class. What is the reason ?
OOP limitations in Lua ?

function Klas:Circle() print('Circle') end . . . function Klas:run(value) local gen = {self:Circle, self:Triangle, self:Square} gen[value]() end

If the function is outside the class, there is no problem. I’m just interested in this.

4 posts - 2 participants

Read full topic

Bonsoir,
Nous voudrions acheter un clavier midi mais non ne savons pas vers lequel nous diriger., un qui serait compatible avec renoise.
J ai la possibilité d’avoir un Roland Edirol Pcr 800 midi controller.
Pouvez vous m’aider et me dire si cela serais suffisant?
Merci a tous pour vos retours
Jennifer

2 posts - 2 participants

Read full topic

Daw : Renoise
VST : Nexus4 / #Omnisphere
Video : https://vizzy.io

hope you’ll enjoy this one, included cute girl vocals for this one

Sun - Chaotic Girl

Rumble Sun - Chaotic Girl

Daw : #Renoise VST : #Nexus4 / #Omnisphere Video : https://vizzy.io #trance #electronicmusic #tracker #vocaltrance

Duration: 208

2 posts - 2 participants

Read full topic

Is it possible to route audio into vsti’s?

TAL DRUM - Record Sample, FX, Mod Matrix

1 post - 1 participant

Read full topic

Hello,
I use renoise for my sample-based song bases (triphop/downtempo) and noticed that the exact same DSP chain (with external VST) sound much better when put on the TrackDSP lane than on the SampleDSP lane.

Is there an explanation for this?

Greetings

9 posts - 4 participants

Read full topic

Accidentally found this page - there’s a load of free old and classic VSTs - instruments, effects and more:
https://plugins4free.com/instruments/

I personally recommend ErsDrums.

1 post - 1 participant

Read full topic

Description:

The Paste Sample Selection uses the selection without using clipboard copy so you can paste the selection after the selection itself or at the end of the audio waveform via new key commands.

When you paste, it will automatically select the pasted area, so you can repeat the operation to create continuous pastes.

It is possible to combine the new keyboard commands with the classic CTRL-C and CTRL-V to enhance combined control.

To assign the three new keyboard commands: Go to “Renoise:Edit/Preferences/Keys/Global/Tools/ ~ PSS …”:

1. Clone Sample Selection After End (includes the data)
2. Clone Sample Selection Continuously (includes the data)
3. Paste Sample Selection Continuously (overwrite the data)

To download: renoise.com Paste Sample Selection | Renoise

Renoise is a digital audio workstation. It lets you compose, edit and record production-quality audio using a music tracker-based approach. It features a wide range of built-in audio processors, alongside support for all commonly used virtual...

Related link: What feature are you hoping for in upcoming Renoise releases? Ideas & suggestions Simple but necessary thing. Allow to PASTE multiple times in Sampler . Like in any other programs.

3 posts - 3 participants

Read full topic

I started working on a track and recorded some guitar without any noticeable latency problems, but a day later when i tried to record some more the latency was suddenly very high. I tried restarting the PC, but latency was still horrible. Then i turned off all the effects on all tracks, but still the latency suck balls.
I’m not sure if the problem is caused by Renoise, could perhaps be my sound card, but i checked the settings and it’s set to 5ms which i’m not supposed to notice. The experienced latency is probably more like half a second or more.
The cpu usage is less than 5%, so that shouldn’t be an issue. I also turned off most of the apps running in the background.
I can’t understand what i may have done to cause this. Any ideas?

5 posts - 4 participants

Read full topic

Hello, i would like to create exports of long mixes (5+ hours) with a nice plugin to improve sound quality. the memory i have is 96 GB and should be sufficent to support such features. why is there a limit on 2 hours and some minutes.

10 posts - 4 participants

Read full topic

i tried to activate through remco@workandtravel.world, but did not receive the activation mail on time, the .com is fine

1 post - 1 participant

Read full topic

What about a block divider? I’m thinking about a function that works like the separate funktion, but instead of just separating once at line, it will divide the block in equal blocks of the same size, if possible.
So, for example, you can divide a 16 lines block into 4 4 line blocks at line 04, but if you divide at line 05, you will get 3 blocks with length 5 and 1 with length 1.
That would be great for re-arranging large blocks in particular.

All the best,
Michael aka Minkepatt

2 posts - 2 participants

Read full topic

Hi,
What about a FX-modifier that covers the harmonic series? This FX would manipulate the pitch of a sample like Dxy and Uxy, but not based to parts of harmonics instead of semitones.

Fortunately, Hxy is still not in use (unknow effect number), so you could give this behaviour to it:
x divides the frequency of a pitch by n+1
y multiplies the frequency by n+1
Taking the n+1 equation, you would avoid a division by 0 and a range of four octaves with each variable. H0F will take a pitch four octaves up, HF0 four octaves down. In between, you may have any pitch treatments that will be harmonically correct in a certain way.

All. the best,
Michael aka Minkepatt

3 posts - 2 participants

Read full topic

Good morning, I have a problem with the Behringer modules (model d, pro 1, wasp, cat) I connected the synthesizers via USB cable. I set a different midi channel on each module. This configuration works fine on other Daw but on Renoise it doesn’t. It only recognizes one synthesizer, 3 others don’t. Has anyone had the same problem? thank you for all the information you give me, see you soon Leonardo

5 posts - 3 participants

Read full topic

Suppose I have a filter with a 5kHz cutoff, but I want to set it to 1kHz for a few lines. If I insert commands to set it to 1kHz and then 5kHz, all of the lines before the first command will also be 1kHz, so I need to insert a 5kHz command before the 1kHz as well. Not only that, but if I decide I want the rest of the song to actually be at 7kHz, I have to go back and change both the ‘before’ and ‘after’ command. The behavior I’d like is that I can insert a command to temporarily set the parameter to 1kHz, similar to how the volume/pan columns only set the parameter for that one line, and not have to worry about what the old value is.

I can somewhat get this behavior by actually having two filters and turning them on and off, labeling them ‘normal filter’ and ‘temporary high-pass’ or whatever, but that seems clunky. Any suggestions?

6 posts - 4 participants

Read full topic

Hey guys there’s a new tracker available for iPhone called SquareBeat. It’s like a little Renoise Jr. Check it out.

4 posts - 2 participants

Read full topic

Okay, so guys, dish out all the helpful features of a calculator? I am getting the hang of programming a multi-purpose calculator, but it would be non-xrnx. I don’t think an xrnx file would work well unless there’s way too many windows that pop up in Renoise, it’ll be very strange to implement. Plus I was making a separate app before that one I posted a while ago that I sent, that actually tunes the C-4 Key of an A-4 Key reference tuning original key and you can get the fine-tune value to adjust, I actually don’t know how useful that is actually, probably it’s a stupid idea, I guess I was just having fun with it. If you use specific types of calculators yourself, anywhere online or anywhere else strictly for music. Tell me what they are. And of course you can trust my bin files, why would I screw up my Renoise Forum Account and my registration? I read that reply somewhere on one of those posts. When I was a teenager I wanted to make viruses, now as a middle-aged man, I want to dish out free apps. I made an Ultimate Password Generator, a Cipher/Decipher app among other things. I just wish I had a Mac and a Windows computer, so I can make sure they’re bug free. >_< I would suggest dual-booting with the distro AntiX Linux which I use, you can use Windows VSTs on it through a wrapper. And This AntiX on a netbook boots on a 5,400 RPM hard-drive like UEFI booting. It’s pretty damn fast and Windows 10 took forever to boot on this thing that I use. And it’s actually more useful than Windows. And very snappy and responsive on this low-grade machine I use. If you don’t want to dual-boot, I guess an VM emulator? LMFAO! where am I even going with this? okay, bye.

7 posts - 2 participants

Read full topic