Renoise Forum

Hi all,
Chris from GPU Audio here to tell you that the latest version of our FREE FIR Convolution Reverb now supports AMD! (along with some other updates). We’ve worked closely with AMD to make this happen, with some exceptionally complex technical challenges given the AMD architecture.

This means that in addition to the full support and partnership of NVIDIA, we can now bring highly tuned processing power of GPUs to millions of new audio workstations, producers and musicians.

Note this is still an early access release so for AMD users, it’s essential to follow the install steps provided in the readme file available here.

Supported AMD GPUs by Architecture:

Vega* Navi 1X Navi 2X
navi21 (gfx1030)
navi22 (gfx1031)
navi23 (gfx1032)
navi10 (gfx1010)
navi14 (gfx1012)
vega20 (gfx906)
vega10 (gfx900)

Jun 2017 Jul 2019 Nov 2020
Radeon RX Vega/Radeon VII(7nm)
Radeon RX 5000
Radeon RX 6000

*Vega isn’t “officially supported” yet, but can still be tested.

A Beta Suite of plugins is nearing completion and will be released in the coming weeks - with Apple support well on the way. Download the updated Early Access plugin for FREE here:

https://earlyaccess.gpu.audio/

We spoke to Sonicstate at NAMM if you’d like more general knowledge on GPU audio:

https://www.youtube.com/embed/IFdgymosszA

Join our Discord Channel for weekly AMAs, bug reporting and feedback, and check out our Youtube Channel for the latest information and tech interviews.

If you’re interested in developing for the platform, we have an SDK in development, which you can sign up to receive here

We’d love to know what you think!

Chris [midierror]

4 posts - 2 participants

Read full topic

I tried this with 3.3.2 and 3.4.2. Mac 10.14.6
I haven’t gotten this bug with another plugin, but I haven’t used this feature much. With the few I’ve tested tho this doesn’t happen except with SampleTank.
I load a new blank song, and the SampleTank 4 ( or 3 ) AU or VST. Load a preset in the AU or VST, have tried many sounds, drums pianos etc, it does it with all.
I use the plugin grabber to get a few notes

There is a blank area at approx 163 samples in, lasting for approx 254 in every single sample that is grabbed. So unfortunately this feature is unusable with this plugin.

These blank areas do not happen if I, for example, play the notes as a pattern and then render. If anyone else has SampleTank on mac or windows and they could test to make sure its not just me that would be great, but I’m pretty sure I’m doing everything right and computer is working fine, licenses valid.

1 post - 1 participant

Read full topic

Trying out some free vst3 plugins today downloaded from: Plugins / downloads
Renoise 3.4.2 hard crashed, vanished after scanning them (last vsti named VSTISID). The log doesn’t say much, but perhaps you can replicate?

"Audio Plugins: Searching for VST3 plugins in 'C:\Program Files\Common Files\VST3'
Audio Plugins: Searching for VST3 plugins in 'C:\Program Files (x86)\Common Files\VST3'

Vst3Plugs: Instantiating: C:\Program Files\Common Files\VST3\Darvaza.vst3…
Vst3Plugs: Releasing: igorski.nl: Darvaza…
Vst3Plugs: Instantiating: C:\Program Files\Common Files\VST3\Filterstation.vst3…
Vst3Plugs: Releasing: Filterstation.vst3…
Vst3Plugs: Instantiating: C:\Program Files\Common Files\VST3\fogpad.vst3…
Vst3Plugs: Releasing: igorski.nl: FogPad…
Vst3Plugs: Instantiating: C:\Program Files\Common Files\VST3\homecorrupter.vst3…
Vst3Plugs: Releasing: igorski.nl: Homecorrupter…
Vst3Plugs: Instantiating: C:\Program Files\Common Files\VST3\Reason Rack Plugin.vst3\Contents\x86_64-win\Reason Rack Plugin.vst3…
Vst3Plugs: Releasing: Reason Rack Plugin.vst3…
Vst3Plugs: Instantiating: C:\Program Files\Common Files\VST3\regrader.vst3…
Vst3Plugs: Releasing: igorski.nl: Regrader…
Vst3Plugs: Instantiating: C:\Program Files\Common Files\VST3\transformant.vst3…
Vst3Plugs: Releasing: igorski.nl: Transformant…
Vst3Plugs: Instantiating: C:\Program Files\Common Files\VST3\vstsid.vst3…
Vst3Plugs: Releasing: igorski.nl: VSTSID…
"
After rebooting Renoise the plugins are included in the lists so it still worked after all.

1 post - 1 participant

Read full topic

Hi

TLDR: scarlet 2i4 audio interface suddenly no longer being recognized by Linux Mint.

In depth:
I have a Focusrite Scarlet 2i4 Gen1 that was working fine on Linux Mint 19 this morning. But come this evening when I turned on the laptop again it’s no longer being seen by Mint’s sound devices. I didn’t update or change anything. It just disappeared from my available audio devices.

The thing is, I can still monitor incoming audio via the unit. And thus it’s still getting power via USB (with a little green light on the unit and all).

It’s also listed under the connected USB devices list via “$ lsusb”. But no matter what I try I can’t make it show up in my audio devices in the sound tab.

I’ve tried the usual things like switching out the USB cables and ports. Even tried it under a clean portable version of Mint 20.3 but that yields the same problem.

Unfortunately I don’t have access to another computer at the moment to try to connect the 2i4 to. To rule out the USB ports on my laptop. Though other USB devices work just fine, so the USB ports aren’t highly suspect.

Do you have any ideas on what I can try to get it work again?

Or do you have any ideas as to what might have failed on the unit that causes this behavior?

I’m not incredibly Linux savvy but I am willing to try things & learn.

Thank you for thinking along!

7 posts - 4 participants

Read full topic

I am on MacOS Catalina 10.15.2 (19C57)
Renoise 3.4.2 (25th april built) basically
if i load a new track I can play it… but as soon as I stop it and press CMD to play again it keep retriggering on the first not.
Good to make glitch sounds, not for tracking

https://www.youtube.com/embed/uE65OC7np1M

2 posts - 2 participants

Read full topic

Is there any auto tuner plugin ?. I have some orchestral samples which I would like to map to keyboard.
Not sure I even need one to play a sample in different notes, if I tune it to A 440Hz will the other keys play correctly.
I’m just not sure what is the best solution.
Regards

4 posts - 2 participants

Read full topic

THE VIDEO LINK:
https://drive.google.com/file/d/16Yo6TR6OstR6hyjouYF3Qcf2TZHMLHTn/view?usp=sharing
++++++++++++++++++++++++++++++++++++++++++++*
Cockos reastream + VSThost

https://www.reaper.fm/reaplugs/

hermannseib.com VSTHost

VST Host Description

2 posts - 1 participant

Read full topic

I wanna buy a better keyboard so that i dont have to use my laptop keyboard all the time. So what sizes of keyboard do you guys use for renoise, do you use the numberpad etc. I’d be super interested to hear your opinions.

8 posts - 8 participants

Read full topic

Here is a crude little formula for the seamless playback of an extended sample (e.g. a full acapella track) over multiple patterns.

It uses sliced or offset playback in 15 second chunks (other lengths will work as long too just change what you divide the BPM by).

It involves two steps:

1st: (Beats Per Pattern) = (Beats Per Minute) / 4

2nd: (Lines Per Pattern) = (BPP) x (Lines Per Beat)

Set the lines per pattern to the number calculated and enter the whole sample sequentially at the start of each pattern using offset FX or Slice Markers.

To get the formula to output a whole number bellow 512 for LPP you may have to adjust your BPM and LPB according how you divide the track.

There is probably a less clunky way of achieving this but I figured the above method may as well be posted.

3 posts - 2 participants

Read full topic

This is probably a really dumb question. I’ve been trying to improve my music theory knowledge and feel like I’m making some good progress. But what happens when I trigger a C minor chord in a phrase with lets say a D#4 instead of a C4? It sounds like a rave stab when I trigger it with different notes, but not sure what’s happening to the actual triad of notes. So, if I write a chord progression within the phrase editor in the C minor scale I should trigger it with a C note right? And would it be in a different key otherwise? I’m starting to think of it as like an already rendered chord loop sample that’s being pitch shifted? but not sure if that’s right.

5 posts - 3 participants

Read full topic

Thanks for running Renoise.

I have sketched out the jump command to be as simple and highly applicable as possible.
In particular, if combined with the Yx command, it will be possible to control with probability whether or not the line itself is executed, which I believe will enable a variety of new performances with simple expressions.
Please consider this.

Sorry if I am saying something strange.

1. Relative jump from current line to xx lines up

• Command example: “JUxx”
• xx=specify jump to xx lines up from current line

If the whole line is 00-31 (0x1F), then When current line is 15 (0x0F):

xx | line number to jump to and comment ---+----------------------------------- 00 | 15(0x0F) Loop the playback of 0x0F, `Y0`=Play 0x0F only once without looping, `YF`=Loop the playback of 0x0F 01 | 14(0x0E) Jump before playback 0F | 00(0x00) Jump before playback 10 | 31(0x1F) Jump before playback

• Yx command allows specifying the jump probability

2. Relative jump from current line to xx lines down

• Command example: “JDxx”
• xx=specify jump to xx lines down from current line

When the whole line is 00-31 (0x1F)
When the current line is 15 (0x0F):

xx | line number to jump to and comment ---+----------------------------------- 00 | 15(0x0F) Loop the playback of 0x0F, `Y0`=Play 0x0F only once without looping, `YF`=Loop the playback of 0x0F 01 | 16(0x10) Jump before playback 0F | 31(0x1F) Jump before playback 10 | 00(0x00) Jump before playback

• Yx command allows specifying the jump probability

3. Absolute jump from current line to line xx

• Command example: “JHxx”
• xx=Line number to jump to, specified in hexadecimal

When the whole line is 00-31 (0x1F)
If the current line is 15 (0x0F):

xx | line number to jump to and comment ---+----------------------------------- 00 | 00(0x00) Jump before playback 01 | 01(0x01) Jump before playback 0F | 15(0x0F) Jump before playback 10 | 16(0x10) Jump before playback

• Yx command allows specifying the jump probability

4. Relative jump from current pattern to xx pattern previous

• Command example: “JPxx”
• xx=specify jump to xx pattern previous from current pattern

When the overall pattern is 00-31 (0x1F)
When current pattern is 15 (0x0F):

xx | pattern number to jump to and comment ---+-------------------------------------- 00 | 15(0x0F) Play 0x0F again and loop 01 | 14(0x0E) Jump before playback 0F | 00(0x00) Jump before playback 10 | 31(0x1F) Jump before playback

• Yx command allows specifying the jump probability
• This command can also be used for phrases. In that case, it jumps to xx=relative phrase number instead of the pattern, or to the current phrase number if xx=00
• Consider the option to display the pattern number in hexadecimal
• Consider the option to display phrase numbers in hexadecimal

5. Relative jump from current pattern to xx pattern next

• Command example: “JNxx”
• xx=specify jump to xx pattern next from current pattern

When the overall pattern is 00-31 (0x1F)
When the current pattern is 15 (0x0F):

xx | pattern number to jump to and comment ---+-------------------------------------- 00 | 15(0x0F) Play 0x0F again and loop 01 | 16(0x10) Jump before playback 0F | 31(0x1F) Jump before playback 10 | 00(0x00) Jump before playback

• Yx command allows specifying the jump probability
• This command can also be used for phrases. In that case, it jumps to xx=relative phrase number instead of the pattern, or to the current phrase number if xx=00
• Consider the option to display the pattern number in hexadecimal
• Consider the option to display phrase numbers in hexadecimal

6. Absolute jump from current pattern to pattern xx

• command example: “JXxx”
• xx=pattern number to jump to, specified in hexadecimal

When the overall pattern is 00-31 (0x1F)
When the current pattern is 15 (0x0F):

xx | pattern number to jump to and comment ---+-------------------------------------- 00 | 00(0x00) Jump before playback 01 | 01(0x01) Jump before playback 0F | 15(0x0F) Jump before playback 10 | 16(0x10) Jump before playback

• Yx command allows specifying the jump probability
• This command can also be used for phrases, in which case it jumps to xx=absolute phrase number instead of the pattern, or to the maximum phrase number if xx=00
• Consider the option to display the pattern number in hexadecimal
• Consider the option to display phrase numbers in hexadecimal

12 posts - 3 participants

Read full topic

The plugin odd sound mts for micro tuning,hasn’t been working properly since last update,it now shows a blank screen when plugin is loaded.Also a separate issue I’m having is that a lot of old tracks Made in the last version of renoise do not open in the new version,I have to load older version in order to work with them.

5 posts - 2 participants

Read full topic

I have a unique issue which I wonder if anyone can provide some insight into. Certain VSTs I use in Renoise are doing something such as cycling a sequence of modulation at a certain rate. It seems like when I reload the Renoise track, the cycle does not reset to the same start point, and it kind of ‘endures’ over reloading the track or restarting Renoise, however will reset (I think) upon restart of PC.

Does anyone know if there is some kind of ‘flush cache’ function in Renoise or have any suggestions towards my described issue above. Thank you in advance for any replies.

9 posts - 3 participants

Read full topic

Hi,
I’m not sure it’s easy to reproduce but I’ve never seen this behaviour in any VST host for the same plugin.
So I’m using Green Oak Crystal VST for Windows (freeware), on Linux (Manjaro) using Yabridge and Wine Staging (versions are irrelevant, the problem has been happening through many versions).

When loading Crystal in any Renoise project, it works perfectly. However, everytime I click the Renoise UI to select plugin programs, what happens is:

• Crystal UI quickly shows various values in its preset name box (parameters values)
• Would not be an issue if it did not take around 30 seconds to do this (every parameter for every preset)
• While it does this, Renoise is unresponsive. Also happens even if I hide Crystal’s UI.
• It happens everytime I click the Programs button in Renoise to show the presets.
• When it’s done, the list of programs appears as intended.

However, everything works normally if, instead of showing the Program selection popup, I click on the “Next program” and “Previous program” icons on the box.

Note that it’s probably not related to Yabridge since everything is normal in another Linux host like Carla.

Crystal can be found at this URL: Crystal VST Instrument

2 posts - 2 participants

Read full topic

Worked out another way to do a similar sort of action as the other granulators I’ve been working on. This one is done using the delay module and two PDC modules, controlled via LFOs. Only have used them on microsound clicks, so you’ll want to figure out a way to add your own envelopes, etc. Added a slight pitch warble to the unit as well, just for fun - not a pitch shifter, just a mild vibrato.

Gran-U-Warble.xrdp (13.8 KB)

1 post - 1 participant

Read full topic

The updates are valid until January 2023.
Price: just buy the ‘duck’ from devious machines plugin for me to my email. Now it costs £14 while the promotion is going on, then it will cost £20.

If suddenly important, early deals, licensed renoise.

Selling my Renoise license up to version 4.2 Off-Topic I bought Renoise this summer, felt, studied, made several projects and realized that it did not suit me. price: 50$ PayPal. Now the license is issued in my name, we will transfer the license to your name and email. [Screenshot_5]

1 post - 1 participant

Read full topic

Lately I havent had any sun on my skin ,since I am so deep into supercollider
For me its one of the hardest programs to learn , since I don’t have a coding background and well let’s just say forget everything you thought was logical
The dsp part is easy , but the SC language pheww …
I started two years ago but gave up after a few months , now back into it and I am making some progress
Synthdefs , pdefs etc…
Made some really great instruments , microtoninc clones ,FM,Phm stuff where each declared argument can be sequenced from a Pbind , whcih is really fun since you can nest pseqs inside pseq , having all kinds of polyrhtym and polymeter going on .
Here is some simple stuff I made , these are just loops , all synthesized and sequenced in supercollider
Link goes to gearslutz since we can’t upload soundfiles
https://gearspace.com/board/attachments/electronic-music-instruments-and-electronic-music-production/1023725d1656605832-whos-into-supercollider-tonz-two-instances.mp3’
https://gearspace.com/board/attachments/electronic-music-instruments-and-electronic-music-production/1023338d1656192238-whos-into-supercollider-supercollider-noise.mp3
https://gearspace.com/board/attachments/electronic-music-instruments-and-electronic-music-production/1023749d1656628062-whos-into-supercollider-keeping-bussy.mp3
https://gearspace.com/board/attachment.php?attachmentid=1023966&d=1656766177

11 posts - 7 participants

Read full topic

I want to send OSC from reaktor ,supercollider to renoise and vice versa .
But even the most simple step as sending oscm essages from reaktor to renoise doesn’t work .
First launching renoies ( to make sure it’s audio driver has priority ) , then starting reaktor .
In reaktor I set the ip adress to host ( which automatically inserts the correct ip ) ,choosing same port as renoise (8001)
Then creating a midi note module to OSC out ( in reaktor ) ,then setting a renoise instrument midi in to eceive from OSC
No luck whatsoever

2 posts - 2 participants

Read full topic

Hi guys. Sorry if this one is easy, I just can’t seem to find it…

How can I jump to a specific pattern? Ideally, I would like to map buttons on my controller keyboard to jump to a specific pattern number. Then I can kinda “jam” around with structure ideas.

I’m sure it’s easy just can’t figure it out.

Cheers

9 posts - 4 participants

Read full topic

Hey everyone, been using Renoise for a few weeks and been loving this community and how helpful you all are. In an attempt to return the favor Id like to offer my mastering services to you. Ive got a pretty modest home studio and would love to up my credits so Im willing to do some free mastering to get your tracks a little more polished in return for those sweet credits. Hit me up and lets get to work!

4 posts - 3 participants

Read full topic