Renoise Forum

@trueschool wrote:

(Reposting here in case this is already currently possible).

In the song sequencer, it’s possible to group patterns into sections, but I have an idea to make this feature MUCH more useful for live performance.

Imagine if you could set each section to loop endlessly or to move ahead to the next section automatically.

In the screenshot below, I have a song where I want the intro to loop the first two patterns over and over until I tell the song to move ahead to the Verse 1 section.

Then we automatically move from Verse 1 to the Chorus. After the chorus, we go to the Break which can loop endlessly (to support an extended guitar solo or whatever), but when we’re ready to dive into Verse 2, we just push the song ahead.

This would just require two settings to be added to the Section feature.
One that says “loop this section until the user inputs a command to move forward”,
or one that says "move through this section automatically (the default functionality as it exists now).

Then, the individual sections could be assigned to a simple MIDI controller, allowing the musician to switch between whole sections of the song, greatly simplifying live performance.

I’m mainly a guitar player and singer, and when I perform live, I’d like to be able to easily switch between patterns without a lot of input and hassle. Ideally, I’d map a footswitch with the 4-5 main sections of a song and switch between them while I play.

What do you think? Is this possible? Would this functionality add value for you?

Posts: 1

Participants: 1

Read full topic

@trueschool wrote:

In the song sequencer, it’s possible to group patterns into sections, but I have an idea to make this feature MUCH more useful for live performance.

Imagine if you could set each section to loop endlessly or to move ahead to the next section automatically.

In the screenshot below, I have a song where I want the intro to loop the first two patterns over and over until I tell the song to move ahead to the Verse 1 section.

Then we automatically move from Verse 1 to the Chorus. After the chorus, we go to the Break which can loop endlessly (to support an extended guitar solo or whatever), but when we’re ready to dive into Verse 2, we just push the song ahead.

This would just require two settings to be added to the Section feature.
One that says “loop this section until the user inputs a command to move forward”,
or one that says "move through this section automatically (the default functionality as it exists now).

Then, the individual sections could be assigned to a simple MIDI controller, allowing the musician to switch between whole sections of the song, greatly simplifying live performance.

I’m mainly a guitar player and singer, and when I perform live, I’d like to be able to easily switch between patterns without a lot of input and hassle. Ideally, I’d map a footswitch with the 4-5 main sections of a song and switch between them while I play.

What do you think? Is this possible? Would this functionality add value for you?

Posts: 1

Participants: 1

Read full topic

@Mentlegen wrote:

Hey, just bought a VST for use with kontakt player. After I installed Kontakt player and located the .dll file so that Renoise could recognize it, it worked for around an hour. now Renoise will not recognize Kontakt.dll despite my attempts to reinstall kontakt player, as in, Renoise can no longer find the .dll

Any advice? has this happened to anyone else?

Posts: 1

Participants: 1

Read full topic

@Achenar wrote:

Rx in the Vol/Pan column re-triggers a sample from its current position. Applying this to a played slice (via key, not via Sxx) and moving the containing markers causes Renoise to constantly update the playback position, creating some interesting results.

Posts: 1

Participants: 1

Read full topic

@Raul wrote:

I have an audio wave already established. I want to normalize it or have the value control from -1 to +1 in the sample editor.

Does anyone have information of what mathematical formula or what procedure should I do to solve these operations?

At the moment, I know how to get the maximum positive and negative value. Therefore, with a subtraction I have the maximization value.

But how do you maximize a wave? Maximize allows you to preserve the wave pattern, but larger. It is not the same as styling it up and down.

The API gives us access to the position of the frames and the value of the sample between -1 and +1. By iteration it is possible to modify all the points as you like.

Posts: 1

Participants: 1

Read full topic

@quangstuh wrote:

Hey, I can’t seem to backtrack how to get my note-off to record. It was recording the notes off, but I was messing with the midi’s record & play filter and it stopped functioning. Has anyone else encountered this problem?

Posts: 1

Participants: 1

Read full topic

@gentleclockdivider wrote:

I just prchased xils lab le 3 ( reduced price ) and since the latest beta has a gui bug I had use the previous version
This version however does not render to sample

Posts: 1

Participants: 1

Read full topic

@Loopsalot wrote:

Heyo! New to Renoise after looking around to try and find something similar to Fast Track 2, which was my jam in the 90’s. So stoked to see the vertical tracker community still alive and well!

I got Renoise set up, plugged in a midi keyboard, but when I’m just playing around looking for good melodies, beats, bass lines, etc… every instrument in my instrument list triggers on every midi keypress, unless I change the midi input on that instrument to ‘None’. Is there a way to only send the midi trigger to the selected instrument?

I’m sure it’s something dumb on my end, and I’m still working through the tutorials, but I very much appreciate the help, and glad I stumbled into this community

Posts: 1

Participants: 1

Read full topic

@Dry_Eyes wrote:

Check it out. Everyone’s holed up trying to avoid COVID-19, so here’s a tribute to those empty streets you can see if you look out the window…

Posts: 1

Participants: 1

Read full topic

@andromeda wrote:

Hello everyone ! I would like to report my new song, Un Sogno Dove Amarci, on my soundcloud page (https://soundcloud.com/user-108952518). Dedicated to Cristina. Happy listening!

Posts: 1

Participants: 1

Read full topic

@esaruoho wrote:

Hi, I’ve been wondering. I have a ton of shortcuts for loading efx (au/vst) to TrackDSP. I do that in Pattern Editor, Sample Editor, Mixer, anywhere.

Lately I’ve started thinking, hey, having Sample FX Chains in the sample is pretty neat too.

So, can Renoise detect, or, state, that you are in the FX Effects Tab, and is it possible to load VST/AU efx into the selected instrument’s sample fx chain?

I’m basically thinking of modifying the shortcuts to either load them to trackdsp or to sample fx chain.

how would i go about doing that?

Posts: 1

Participants: 1

Read full topic

@esaruoho wrote:

I’d prefer to make it so that TAL Reverb-4 would always boot up with specific settings, specific to Renoise.

in the Init*. settings.
I’m wondering, how does one do that? I could script the presets myself, sure, and boot them up with a shortcut, but I’m wondering, is there no nicer way of doing it, i.e. “Renoise specific preset settings loaded by default, when effect is added to dsp chain”

Posts: 1

Participants: 1

Read full topic

@andromeda wrote:

Hello everyone ! Those interested can visit my soundcloud (andromeda) page to listen, comment and share my songs entirely made with Renoise 3.1.1! Thanks and happy listening!

Posts: 1

Participants: 1

Read full topic

@midierror wrote:

Yes, its frikkin tiny

midierror

Posts: 1

Participants: 1

Read full topic

@esaruoho wrote:

Hi, I’m wondering, I’d prefer to use an actual editor to edit my tool Paketti, while Renoise is open.

If I save the files, does Renoise immediately notice the changes and load them? Or do I have to do something extra in Renoise?

Posts: 1

Participants: 1

Read full topic

@spdk wrote:

Hi,

How can easily select an envelope over a couple of patterns and delete it? I can select them pattern by pattern, but not all at once.

I’ve added an image as an example, I want to delete alle envelopes from pattern 36 to 52, but leave 29 to 32 in place.

cut_envelope|690x175

Thanks, It’s bothering me for a long time, I’ve always selected the envelopes pattern by pattern, but that can’t be the easiest way I hope

Posts: 1

Participants: 1

Read full topic

@Spacewizardinspace wrote:

Ive been reading things and looking at things, and I feel really stupid, because I mostly am with this, but how do I record from renoise into an abelton track, im using the demo right now and trying to wrap my head around all of it, I really like the flow but im just dumber than sack of cement at a nascar rally.

Posts: 2

Participants: 2

Read full topic

@James_Britt wrote:

https://loopopmusic.com/polyend-tracker-review-and-full-tutorial-from-sample-to-song

Tracker from Polyend is a new standalone hardware groovebox based on a grid-sequencing workflow first introduced on Amiga computers in 1987.

Disappointed that they use the general term “tracker” for their product, but that’s life.

Thought folks might be interested.

Posts: 1

Participants: 1

Read full topic

@EatMe wrote:

something something

Piano House: Bossa Bien

Kthanks.

Posts: 1

Participants: 1

Read full topic

@printerrepairdubai wrote:

Paper jam

The main and general issue with the printer is paper jam, it means that paper is stuck inside the printer and printer is not working. There are many reasons for paper jam some of them are given below.

Sensor Issue: There is Optical sensor which give command to printer for picking up the paper from paper tray and print. Sometime that sensor doesn’t work and cause paper Jam for the solution for this is call UAE TECH for the professional replacement of sensor.

Pick up roller: It is soft and rubbery surface which pick the paper from paper tray. Sometime dust or dirt in roller cause for paper jam issue. It is very sensitive thing if not done by care then it can head.

Transfer belt: Transfer belt pick the paper and passes it through each component of printer to complete the printing process. Sometime due to dust, dirt or break down of transfer belt cause the Paper Jam.

Paper Tray: Sometime putting wrong paper tray to wrong model of printer can cause the paper jam and we should clean paper tray time to time to make printing process smoothly.

Size of Paper: Some time wrong size of paper in paper tray cause the paper jam issue.

Ink leakage: Toner or Ink leakage inside the printer could cause paper jam.

Motor Problem: There is a motor inside the printer to move and advance paper from tray to printer head for complete the printing process, due to motor sometime paper jam issue occur in printer.

M aintenance box: Its stores ink that gets bloomed from the system during print head cleaning. When an ink cartridge is used or the maintenance box is at the finish of its service life, you need to replace it.
Hp printer repair dubai

Posts: 1

Participants: 1

Read full topic