Renoise Forum

@Jonas wrote:

A thing that has bothered me in Renoise is being able to see in which track I’m in the pattern matrix at a first glance. I’d like a more pronounced view, have it be optional and/or be able to set the strength of the pronunciation. Extra slider(s) in the gui preferences for the lines that enclose and signify cross-hair position.

There is a difference in the graphics whether you’re focused in the pattern editor or in the matrix. When you’re working in the pattern editor, the matrix can look like this;

When the slots are empty in the matrix it is clear enough which pattern has the cursor.

When you’re focused inside the pattern editor, it becomes more unclear in the matrix when tracks have note-events / slots are full;

Notice I’m in the track named ‘bass’, you can see its differentiation in color in the top of the picture, yet the block that stands out most is a selection in a different track, empty slot in the same pattern.

Here I’d also like the cross-hair slot in the bass pattern of the 6th pattern stand out more.

When focus is on the matrix, it looks like this;

A little better with the dotted encapsulation, but also open for much improvement imo.

I’m a little colorblind and have tried different themes to see this can be improved. But think a strength setting for the cross-hair lines in the matrix would be great, having a clearer encapsulated matrix slot where the cursor resides in the pattern editor. Anyone else could appreciate pimping of the matrix cross-hair?

First world problems during the rona, sorry.

Posts: 1

Participants: 1

Read full topic

@nateflanigan wrote:

I’m trying to set up multiple outs in max msp and running into a dead end. I understand how to tell the vst~ object to have multiple outs but redux isn’t seeing them. Anyone have any experience with this?

Thanks!

Posts: 1

Participants: 1

Read full topic

@stoiximan wrote:

I think this is a must read for anyone struggling to finish a track.

Stuck at home digging through half-finished projects and songs? We're here to help

Posts: 1

Participants: 1

Read full topic

@Gella wrote:

Hi, as per thread title, is there any way within a Renoise Instrument to “force” it to output audio down a particular mixer channel?

The purpose of this is in a setup with Cubase as a Rewire master and Renoise as Rewire slave - using Renoise effectively as an external sampler triggered by Midi from Cubase, then mixing the audio back in Cubase.

Midi is working absolutely perfectly - triggering different instruments on different midi channels and all that, however, all Renoise instruments output their audio via whichever mixer channel is currently selected, making it impossible to route different instruments to different Rewire busses.

Hope i’ve explained that clearly, its got me well confused

Thanks in advance

Posts: 1

Participants: 1

Read full topic

@gentleclockdivider wrote:

It would be great if we could could get serial filter routing in the instrument editor , this would of course increase cpu usage but I think it’s worth it
Here’s an example of 2 , 4pole moog filters in series ( used in the effects section ) , notice that the resonance of eac filter stacked filter reso.xrns (778.6 KB) is also stacked …( let keep this as an option )

Posts: 1

Participants: 1

Read full topic

@RiDylan wrote:

I realize this has been mentioned before, just squeaking the wheel again because it would be a great feature. Why should I use another DAW when I just want to do everything in Renoise?

Posts: 1

Participants: 1

Read full topic

@rockfistus wrote:

Just thought I’d let ya’ll know there is a thing on Native Instruments site right now where you can get a Komplete Audio interface and it comes with Guitar Rig Pro 5 for free. I just bought it for Guitar Rig

Posts: 1

Participants: 1

Read full topic

@Same_Freaky_Sound wrote:

How the title says, someone has experience with this distributor?
Thanx in advance!

Posts: 1

Participants: 1

Read full topic

@kim_f wrote:

Looking at the machinedrum; thinking maybe that could be cool. Like a:
R008 = reverse pattern to step 8 then next pattern.
Bit nerdy but it would look cool too see your song go backwards. Just an idea.

Posts: 1

Participants: 1

Read full topic

@greatexpectations wrote:

Does anyone know if there is a keyboard cover available with all the Renoise shortcuts? Something like this:

Write, record, edit, and mix your Ableton Live music files on your Mac faster and easier with our ultra-thin form-fitting keyboard cover with shortcuts.

Price: USD 29.95

Posts: 1

Participants: 1

Read full topic

@sock wrote:

Is it possible to use Renoise as a sequencer for a eurorack?

Posts: 1

Participants: 1

Read full topic

@ZaneHolden wrote:

I like the Thinkpad trackpoint keyboard so much I use one for my main PC as well. No trackpad, no numpad. I use a bluetooth one with my Surface Pro as well.

I like have the same keyboard for all cases so my muscle memory isn’t over taxed : )

I’ve remapped the transpose shortcuts, though I keep forgetting them and often just use the right-click menu.

I am unaware of any common shared mapping that avoids numpad stuff.

I ended up just adjusting shortcuts over time, and then made sure I had the same config on all my machines

I also remapped capslock to ESC, also breaks some Renoise shortcuts.

Posts: 3

Participants: 1

Read full topic

@TNT wrote:

About one week ago I switched from Renoise 2.7.1 to Renoise 3.2.1. What a change! New layout and completely different in handling. It took a while to get used to it. But there is one thing I ask myself if it’s a kind of bug or did it simply change compared to Renoise 2.7.1. I’m talking about this:

When you duplicate a plugin within the instrument selector in Renoise 2.7.1. and you change the selected instrument in the duplicated plugin, the instrument name of the selected instrument in the duplicated plugin displayed in the list changes, too. There is ALWAYS the name of the current used instrument displayed in the list.

When you duplicate a plugin within the instrument selector in Renoise 3.2.1. and you change the selected instrument in the duplicated plugin, the instrument name of the selected instrument in the duplicated plugin displayed in the list DOESN’T change.

Did I miss something? I hope so! For me the handling of creating a song would get a little bit more inconvenient. In Renoise 2.7.1 I used to duplicate a VST within the instrument selector and change the instrument in the duplicated VST, so that I didn’t had to load the VST and the selected soundbank all over and over again for the case that I wanted to use several instruments from the same soundbank in one song. Now in Renoise 3.2.1 you will have to rename the duplicated VST into the name of the current used instrument by hand every time, and there is no option of copy and paste. So you literally have to type in every single letter by hand every time you change the instrument in a duplicated plugin. Or is there hope? Does it still work that way somehow in Renoise 3.2.1? Or is it about to come in the next update? Or is it planned like this, no more automatic change of the current used instrument’s name when changing the instrument, and if so, why?

Thanks for helping out!

Posts: 1

Participants: 1

Read full topic

@bunja1979 wrote:

so i connect my hardware synth blofeld keys
add line input to track
midi input / blofeld
midi output /blofeld
play some notes in edit as i want
then record in sampler
delete track once edited
then add recorded edites sample on new track
is this the best way to record my hardware synth ?
im really not interested in vsts atm cheers

Posts: 1

Participants: 1

Read full topic

@Burial wrote:

T R A C K E R S =========== A group for those that enjoy making music with trackers like Protracker, OctaMED, Fasttracker 2, Milkytracker, Renoise etc. Rules: ------------ 1. Self promotion is...

TFGC # 1 - THE AMEN BREAK!

RULES - this round only 1 sample, the most used sample ever, a 6 sec drum loop from 1969, u might heard it in the past .

you can use it as u want , chop , reverse ect… make it into chip squarewave , be original , try to make something u haven’t done before.
you can sample the original sample into more sample aka sound design but without other software than tracker of your choice

time - between 1:00 - 4:00 mintute , bpm - whatever , channels - max 8 channels…
please tag the tune TFGC001 and link to this page , make our community bigger!

u must use tracker for this competition … upload your finished track to soundcloud or youtube or other, but u must also inculde download link to your original module file

only people who participate can vote , and must vote for 1 track and cannot vote for themself

VST NOT ALLOWED!

renoise internal fx are ok…
feel free to DM me if something is not clear about this round and rules

!!!deadline is 25/04/2020!!!

winner will upload sample pack and rules for next compo!

happy tracking and fuck this corona shit already !

Posts: 1

Participants: 1

Read full topic

@nagz wrote:

Hey so this is a problem that irritates me beyond belief.

There are some samples / tunes where Suddenly I get this error and can’t get rid of it.

Obvoiusly when I hit a note on a sample, I want to hear the sample at said note. Sometimes there is a delay to the sound, and the end is chopped. THEN when i play a next sample or an other tone (or same), I get to hear the end of the previous keypress/sound, before hearing what I should.

so it should go like this:

Pressing instr. 1, A-5: AAAAAAAAAAAAAAAAAA
Pressing instr. 1, G-5: GGGGGGGGGGGGGGGGGG
Pressing instr. 2, E-4: EEEEEEEEEE
Pressing instr. 1, C-5: CCCCCCCCCCCCCCCCCC

Instead, I get this:

Pressing instr. 1, A-5: -----AAAAAAAAAAAAA
Pressing instr. 1, G-5: AAAAAGGGGGGGGGGGGG
Pressing instr. 2, E-4: GGGGGEEEEE
Pressing instr. 1, C-5: EEEEECCCCCCCCCCCCC
(and i hear instr.1 CCCCC first whatever note i push on any instrument)

Do you have any idea what it could be? I fiddled around in settings, but nothing helped and I didn’t find a topic for it.

Thanks!

Posts: 1

Participants: 1

Read full topic

@bunja1979 wrote:

are modulation lfo options for pitch only avalable for the sampler ?

Posts: 1

Participants: 1

Read full topic

@bunja1979 wrote:

its a good synth but i’monly using my waldorf blofeld these days so would rather get rid of things i dont use , if anyone wants it let me know i may take an offer
cheers

Posts: 1

Participants: 1

Read full topic

@bunja1979 wrote:

any helpful ways cheers could i use the lfo ? thanks can you also use the lfo for compression cheers

Posts: 1

Participants: 1

Read full topic

@bunja1979 wrote:

IS THERE A WAY to use the Lfo to modulate the pitch ? i cant find a way with the built in plug ins cheers

Posts: 1

Participants: 1

Read full topic