Renoise Forum

@Pomax wrote:

It looks like ReNoise is not using the correct full screen API call on macos (tested on high sierra, mostly because I have no reason to upgrade to Mojave, and upgrading to Catalina would break thousands of dollars of VSTi… >_>), so that rather than becoming a new virtual desktop like it’s supposed to (one you can swich away from with ctrl-left/right), it instead only draws itself at native screen resolution on top of everything else, so you can’t get to your dock, or your system bar up top, etc.

Posts: 1

Participants: 1

Read full topic

@EatMe wrote:

music by EatMe.
composed in Renoise with a MIDI keyboard…
original drum and bass version released in 2014 .

in 2019 added walking bass and strumming guitar from Band-in-a-Box in the Jazz Re-edit.

Posts: 1

Participants: 1

Read full topic

@helltrack wrote:

Maybe I can’t see it, but is there a shortcut to jump between columns (Note, Pan, Delay, FX) in a single track without having to move through every digit of each column?

Posts: 1

Participants: 1

Read full topic

@Dan77 wrote:

Hi

I have recently purchased Renoise after using the demo for a few weeks. Music production is very new to me. I purchased Renoise because it seems a powerful DAW for making drum & bass, and I’m having a blast so far.

I am looking at purchasing a small MIDI keyboard as i think it will be more intuitive instead of the computer keyboard. I would like to trigger notes in the sequencer (& chords), and use the keyboard to place slices of samples, (if possible).

As i have never done this before, i can foresee myself having difficulty if i chose the wrong product.
I have a few options I’m looking at, and would appreciate any feedback on if they are a good fit for the Renoise software and what i would use it for. they are…

Arturia Keystep - 32 key

Arturia Minilab mk11 - 25 key

Akai MPK Mini mk11 - 25 key

The Keystep initially appeals to me the most as it has 32 keys, slim profile. but i like the drum pads on the other 2 models, would they work easily in Renoise? but i also think a keyboard would work well for triggering drum sounds? Is there one particular model that i could ‘grow in to’ so would be a better investment?

Anyway, any advice from you guys that have seen it all would be appreciated.

Thanks.

I use OIS operating system.

Posts: 1

Participants: 1

Read full topic

@Denim wrote:

Hi, if you like techno maybe you’ll like to give my latest track a listen, which was recently released digitally + on vinyl. It was made with Renoise, a Moog Sub Phatty, Korg ER-1 and a Korg Monotron + some vocals which I did through the Microkorg vocoder. It started out with a long-ass live recording where I ran the signal from the ER-1 (splitted) into the Moog’s CV and Filter inputs, and then the output from the moog into itself for some nice feedback, and just tweaked away. It was a quite messy and fun session

Spotify: https://open.spotify.com/album/2JCZmDXb27lkKVDTP3aET9?highlight=spotify:track:41gyCecPH0BtNui8LdGnOr
Beatport: https://www.beatport.com/track/grey-area-original-mix/12581346
SoundCloud: https://soundcloud.com/christian-indregard/priq-grey-area-extract?in=christian-indregard/sets/priq

Instagram & Facebook: /priqmusiq

Cheers!

Posts: 1

Participants: 1

Read full topic

@The_Otter_Years wrote:

Does the maYbe command work on the FX column?

I’d like to use probability on Midi CC messages.

Thanks

Posts: 1

Participants: 1

Read full topic

@sidwave wrote:

by making popup window with mixer and other stuff, that can be moved and resized, youve completely broken the easy way to work.

its just an annoying window, and you move it only , because its in the way of something,.
thats not how mixing works.

mixing is about listening with your ears, and make some analysis, what to change.
and use some time to think about it, then you change something on the mix, because you are sure what you want.

opening the mixer 100+ times and remaking something is the wrong way to mix
the window has now just become an annoying thing.

im saying, that with these new work process changes you made, its going the wrong way for renoise.

im not upgrading. i hope the crazy user interface people with all kinda “smart” ideas, get fired!

Posts: 2

Participants: 2

Read full topic

@Nikola wrote:

I’ve read through the manual, website, etc, and it appears the answer is “No”, but I wanted to double-check: Can Redux be used as a standalone application in Windows (I’d just like to play around with samples), and not as part of a DAW?

Many thanks!

Posts: 2

Participants: 2

Read full topic

@gresade wrote:

I’m on Linux with the Renoise 3.2 Demo.
When I record MIDI (ESI M8U XL) and the notes are short before the next bar, the delay is recorded as FF.
This is what should happen and while recording it also sounds as expected.
When it is played back from the recorded notes in Renoise, the delay is different though, a lot less then needed. So the notes with FF delay are not delayed enough to appear just before the next bar, they appear a lot earlier.

E.g. if I put a note with FF delay before a note in the next bar (without delay), they should be very close in time (approx. a 256th fraction of the time of one line to the next). But it is obviously a lot longer, more like half as needed.
I tried different settings but always got the same issue.

When reording MIDI it means that all notes being played a bit ahead in time will appear much to early in time. Or the other way around, I can not place MIDI notes to be a little ahead in time using the delay column. This is also happening if I type the notes in and do not record via MIDI.

Posts: 1

Participants: 1

Read full topic

@KnownUn wrote:

Enjoy brothers!

Posts: 1

Participants: 1

Read full topic

@robotrobot wrote:

I made a renoise video for a song called Marco Polo. It’s one of the songs off my new ep coming out this Monday.

Posts: 1

Participants: 1

Read full topic

@fladd wrote:

(topic withdrawn by author, will be automatically deleted in 24 hours unless flagged)

Posts: 1

Participants: 1

Read full topic

@teis wrote:

ey …

I’ve been listening to demoscene (yes, Renoise belongs to the demoscene!!!) songs/music again.
and well … there are several well-talented dudes out there.

some being able doing it completely (writing AND producing songs or albums).
but some … are way off when it comes to mastering.

I really love hunz ‘all falls down’ song … but whenever I turn up the volume to the fullest, my ears start to bleed.
same happens to several other songs.

what do yall think?

Posts: 1

Participants: 1

Read full topic

@OopsIFly wrote:

As cannot be found elsewhere on this page, I decided to once again upload my tuned keytracked devices.

They are not just keytracked filters, but can be tuned to exact note frequencies with a keytracker. Many Renoise effects supported, not just the filters! Also there is bend control possible, and you can transpose or tune to harmonics by editing the parameters in the formula device text field (no need to scroll).

The library can be installed by drag’n’drop the file into a renoise window.

There are Doofer presets in the library, that contain pre-setup keytracker/formula/effect combinations. You will want to tweak the parameters of the keytracker, effect and maybe the text parameters of the formula to work with the effects.

Also the library contains the raw formula presets I have gathered so far.

I will in the following days look up my data and put up a table in here the devices each formula will work with. Sorry, can’t be bothered now, it’s been a while since I created them.

org.OoopsIFly.ktrk1.1.xrnl (37.6 KB)

Posts: 1

Participants: 1

Read full topic

@esaruoho wrote:

Hi, how do I fetch the parameters from an unloaded VST/AU plugin. By this I mean, I have a song that is really old. The plugin no longer exists in that specific name. such as AU: Yohng’s W1.

I need the parameters from it, so I can use them with the newest George Yohng’s W1. I have no access to the old W1 component.

Can I access the parameters from inside of the .xrns file somehow, or…?
or from the console? or something?

Posts: 1

Participants: 1

Read full topic

@helltrack wrote:

A minimixer in the instrument tab that let’s you quickly solo or mute instruments and adjust volume, pan and sends with mini rotary dials would be ace. Would be great so you could enter notes and do rough fine adjustments without always having to switch to the mixer panel.

Posts: 1

Participants: 1

Read full topic

@esaruoho wrote:

I’m in the unenviable situation where I’d prefer to use my script on both Renoise3.1 (32bit) and Renoise3.2 (64bit) on macOS (while trying to figure out how to get a 32bit version of Renoise3.2)

There is no “actual” difference between the script, just APIv5 or APIv6.

I would prefer to continue editing the script on both versions. I’d prefer to just have the same script in the same folder for both of the apps. How would I accomplish this, please?

Posts: 1

Participants: 1

Read full topic

@esaruoho wrote:

Is there some way of downloading a 32-bit macOS version of Renoise 3.2.0, please?

Posts: 1

Participants: 1

Read full topic

@Fabrice wrote:

Hi! Here is a song I’ve just submitted for MIKU EXPO 2020 song contest (submitted just before deadline end! ). I used Hatsune Miku English trial version for this song.

Unfortunately I had a big lack of time to compose the song, so I made this really really quickly and I know it’s quite imperfect.
No time for mastering and wrote clumsy lyrics… But maybe the whole track is still presentable.

Posts: 1

Participants: 1

Read full topic

@esaruoho wrote:

I just tried to do this: Copy parameters from a non-loading 32-bit AudioUnit (TAL-Dub III) to 64-bit VST (TAL-Dub-3) - in theory the same plugin.

Got this:
“Can not copy device settings from a ‘aumf:xg70:TOGU’ to a 'TAL-Dub-3”

What should I be doing. Is there some Console / Scripting method for extracting the settings from the non-loading 32bit AU, or…?

Posts: 1

Participants: 1

Read full topic