Renoise Forum

hi. So i have a vst plugin generating midi sequence and sending it to another plugin, which works fine. BUT, for some reason i can not record this sequence to a track…I mean, i get the concept of tracks and instruments being independent, so it looks like two plugins communicate with each other directly, but how do i get to record a midi output of the instrument to a track? I’'m using plugin midi routing option to choose which instrument to send the sequence to…

1 post - 1 participant

Read full topic

It’d be nice if while moving though the Edit notes there was an option to have the notes be triggered and played when the selector block highlighted them. I think it’d be useful.

1 post - 1 participant

Read full topic

I’m just testing Redux in Reaper and when starting the playback directly at the beginning of the note that should trigger a phrase in Redux it will not work. I have to start the playback a little bit before and only then the phrase is triggered. That’s not the case in Bitwig or Renoise.

I monitored the midi events and it is fine, but Redux is not seeing it somehow. Did anyone else observe that?

1 post - 1 participant

Read full topic

This is a deep cut, but hear me out:

I use the step length counter all the time to quickly enter notes at set intervals of lines. And I use the keystrokes to set the intervals, like ⌘+1, ⌘+2, ⌘+3, 4,8, 12, 16, etc.

My challenge is that I don’t use all the integers in between – like I never set my step length to 5, 7, or 9, but I often set it to 12, 16, and 32.

It finally dawned on me that I could update the keystrokes so that
⌘1=1
⌘2=2
⌘3=3
⌘4=4
⌘5=12
⌘6=6
⌘7=16
⌘8=8
⌘9=32

I just did that and am looking forward to the faster workflow that will result. Hope it helps you!

2 posts - 2 participants

Read full topic

Renoise tries to install its ReWire engine on every start, which I’m not allowing it to do, as I never ever had any use for ReWire. It’s a bit annoying though - couldn’t it be an option set for once?

1 post - 1 participant

Read full topic

I’m testing current version on a latest MacBook Pro M1 14" and what strikes me is that the GUI doesn’t seem smooth at all.
I have it in full screen mode, latency down to 1ms (using built in audio device, don’t know how accurate this is), FPS limit off (but frankly no matter the settings, it all seems the same).
And still the VU meter / phase meter / freq analyzer and pattern scrolling seem… well very janky. I’d say even for 60hz, which Renoise probably currently runs at on Mac OS, they seem more like 30? Or even less. I don’t know whether this is a Rosetta thing, and the current closed ARM beta fixes this, or is it something else, but it’s definitely not pleasing on the eye.

Anyway - proper support for higher/variable refresh rates would be really welcome. VRR would bring some nice energy saving while on the go

1 post - 1 participant

Read full topic

Hi,

Renoise Rack plugin like REASON?
I want use Renoise powerfull in another DAW, and without Rewire (which no garanty by properllerhead).

1 post - 1 participant

Read full topic

Not that I post these kinds of things here but I had the page & the images already up with the NoiseTrekker 3 stuff…

Not old only like a decade pretty cool piano-roll sequencer I don’t think anybody knew of…

The Piano-Roll rather limited resolution & you can adjust velocity…

There is ‘knob turn record’ automation…

Internal synth that can be ‘structured’ you can add any of the internal transforms to build a massive synth & you can also use DMO DirectX Plugs in it…You probably don’t have any but if you install SVArTracker you will have what I have in the pics…

WAVE out render works just fine & the demo tune (not very good) sounds clean…

Here image with just about everything open that can be-

Synth has structure editor to change OSC type & to add as many ‘transforms’ as you like & in what order you like-

Here you see dropdown of what can be added & as many instances that will fit onscreen-

Here just adding a bunch to see WTF…

Kinda cool to play with for free…There is also a beatbox for external WAVs to load in for drums or anything else you want to trigger…

Limitations…UhhhYES!..But even as it is it is way more in potential than REBIRTH which seems so beloved…And HEY! Quicker too…

Get the 1.50 from here-

https://web.archive.org/web/20140226194919/http://www.mroc.de/msynth/

1 post - 1 participant

Read full topic

As above.

I know that you can use the instrument automtion to automate instrument parameters, but how can this be done with effect VST’s? I want a reverb to increase in breakdown and can’t find a way to automate the changes. Is it possible?

1 post - 1 participant

Read full topic

There are some various directories on servers one can grab this but…BUTT!!..You can also grab it from the original messageboard on the wayback machine here-

https://web.archive.org/web/20020125161845/http://www.noisetrekker3.f2s.com/

Messing about actually pretty good with some limitations & instability (on rare occasion)…Seems like there would be a NoiseTrekker 3.2.2 Challenge Thread on here somewhere, You know, for the nostalgia, or wait for it…JUST THE CHALLENGE OF IT!!

Especially as you look at the wayback snapshot this page is EXACTLY 20 YEARS OLD as I am posting right now!!!

Of course this would appeal to the ‘elderly’ of users as I suspect many here were probably still crapping their pants 20 years ago…

It’s not perfect but still too good to just be wasting away…

1 post - 1 participant

Read full topic

So I sometimes watch some YouTube video about Renoise subject. There is some old video from 2016. year where someone use some VST plugins. For example “Ambience”.
You can downloaded for free.
But this plugin not present in VST list.
Question: Which version of Renoise I must use for supporting all old VST plugins?

5 posts - 2 participants

Read full topic

Hello,

I’m trying to change the attack value of an AHDSR in a modulation set of an instrument dynamically based on the input velocity. However, the velocity tracker from the modulation devices doesn’t allow to specify a destination and thus I can only seem to change the value vertically by adding/multiplying to the whole AHDSR. As a workaround, I have mapped the attack value to a macro, which I control from a velocity tracker outside of the instrument in the track dsp chain. In the effects chain of the instrument itself there is unfortunately no “intrument macro” device, to control the instruments macros via the velocity tracker effects device from there. Am I missing something here or is there really no self-contained solution (i.e. without relying on track effects) to achieve what I want to do for an instrument?

1 post - 1 participant

Read full topic

I’d love to be able to use Renoise to make music for game soundtracks that require actual XM files. Understandably, Renoise is designed to be it’s own DAW that happens to be a tracker, but the modern options such as Milkytracker or OpenMPT for actual module work are very dated and clunky by comparison to the far more customizable and capable Renoise. I appreciate there are a couple of options for XM export right now, but they’re abandoned and not entirely working and it would be amazing to have a decent solution harness the power of Renoise for game soundtrack development.

1 post - 1 participant

Read full topic

Hello,

Does anyone know how to operate this VSTi on Renoise? I managed to get it running on Linux through Carla rack, but I have no idea how to program it to change instruments with MIDI commands. It does receive the MIDI commands and does something, but that’s not very helpful. If you know any additional resources regarding this plugin, feel free to post.

https://veg.by/en/projects/syxg50/

1 post - 1 participant

Read full topic

Is there a way to change the global tuning, at least for sample-based instruments?

1 post - 1 participant

Read full topic

Hi Community,
Do we have a guide for migrating all our settings, templates, doofers, samples, plugins, etc from an old computer to a new one? I just installed Renoise on my new Mac and it’s all naked.

TIA
Ted

1 post - 1 participant

Read full topic

Hi,

I’m having some trouble setting up for audio “Duplex” recording.

The initial bug is that the level “recorded sample gain” goes down to reduce the number of bits to 24 “in a 32 bit container/stream” . Upon resampling a sampled signal the signal gets progressively softer as a result of sampling 32 to 24. Setting the native sample container to 24 bits would resolve this. “I would have it at 24 bit int all the time”

Coming to the script section, would it be possible to write a script that grabs the master buffer, or assorted buffers. And puts them on the recording channel input. So you can realtime record your buffer without losing signal strength?

2 posts - 2 participants

Read full topic

Sorry for the long title, but I’m interested in having my mouse control the Q of a point in the EQ, where currently if you click a point and scroll up or down on the mouse wheel it locks the point to the horizontal axis. Just like Ableton, if anyone’s use that EQ. I looked through the key bindings in renoise but didn’t see anything, is this possible?

1 post - 1 participant

Read full topic

Open attached file. Delete Unused Tracks will delete the Send Track. It shouldn’t.
Go to the next pattern where the Send Track is turned on, and it works, e.g. nothing will be deleted.

Del Unused Tracks bug.xrns (12.9 KB)

1 post - 1 participant

Read full topic

(topic deleted by author)

1 post - 1 participant

Read full topic