Renoise Forum
New tool (3.1.1): Arturia KeyLab mkII v1.0 build 016 (August 2019)
@Raul wrote:
Arturia KeyLab mkIIThe Arturia KeyLab mkII is a “bridge” tool to make these MIDI controller keyboards (KeyLab mkII 49, KeyLab mkII 61 or KeyLab mkII 88) compatible with Renoise.
In general, it enables all the extra buttons of the controller and converts the wheels and faders into dedicated controls for direct editing in the pattern editor and for navigation.
Activate the tool and go. The learning mode of MIDI mapping is not necessary! Turn this controller into something useful!!!
Development related thread: Tool development: Arturia KeyLab mkII 49/61 (MCU MIDI messages)
Steps to start:- Start Renoise.
- Plug the Arturia KeyLab mkII controler.
- Turn ON the back switch of the controller. Make sure Renoise has detected it.
- Launch the tool: Renoise/Tools/Arturia KeyLab mkII.
- Turn ON the tool.
- Done! Use your MIDI Controller in “Daw Standard MCU”.
- You can put the tool window in the background or close it and continue using the controller. To deactivate the tool, set it to “OFF”.
- Important: In Renoise/Edit/Preferences/MIDI/ “in devices” or “out device”, never use the “MIDIIN2(…)”, “MIDIOUT2(…)”!
- Arturia KeyLab mkII v1.0.016, August 2019 (first release)
https://www.renoise.com/tools/arturia-keylab-mkii
Posts: 1
Participants: 1
Recompile Renoise for Raspberry Pi
@DjToxi wrote:
Hello, I suggest recompile Renoise to run under ARM Linux devices like Raspberry Pi. I think the newest Raspberry Pi 4 has enough power for run Renoise. It feel like Atari with modtracker and Renoise will get more popularity, because Raspberry Pi is famous and lot of people use it. Raspberry Pi has not serious DAW. In this case the Renoise would has some native integrated synth becuase ARM Linux hasn’t any VST plugin ( I thnik).
Posts: 1
Participants: 1
Outside - Land of Bits w/Murkish (chillsynth) free project DL
Darker tekk - feedback type-a
@Land_of_Bits wrote:
im working on this one now guys what you think
kick in the intro its a bit long cause im still figuring out what im going to use
Posts: 1
Participants: 1
S&H LFO Shape to be rounded instead of square?
@Neuro_No_Neuro wrote:
Using the LFO on just about everything, I am curious to know if there is a way to round off the S&H edges so that they are a randomly-shaped sine wave, instead of a randomized square wave shape?
Posts: 1
Participants: 1
Help to recover a previous version of a file
@braisremeseiro wrote:
Hi,
Accidentally I save a song and now I would like to know if there is a method to go back to previous version of the same song. I mean if the file has an history of previous saves and they can be extracted. I am not trying to restore it with a backup that I has.
Please, Can you help me?.
Posts: 2
Participants: 2
Multiple Layers for Sampler (like SFZ, GIG, etc.)
@si1n3rd wrote:
I haven’t found any topics about such a feature, so I decided to create one.
What about multiple keyzones layers for each instrument? I mean the possibility to create several layers that would be played separately depending on the playable MIDI channel or some other value. For example, I have audio samples of a violin separated by velocity and articulation. So I can easily add samples of different velocity to sample, but I can’t add different articulation layers and switch between them in some way. For example, in SFZ we can add such groups and switch between them with modulation wheel, some key switches (C0 - for staccato, C#0 - for tremolo, D0 - for sustain), etc.
What do you think about this? How is it easy to implement with current architecture?
Posts: 1
Participants: 1
LFO reset in doofer
@joule wrote:
Once you place an LFO inside a doofer, it seems quite difficult resetting it in a controlled manner.
The macro knob seems to only react to value changes. Maybe a special case could be made for macros assigned to reset buttons, so that these triggers (like 2100 on a macro) won’t slip by? Or maybe this behavior with macros could be removed altogether?
Posts: 1
Participants: 1
Lifespan of eurorack synth modules?
@Redman wrote:
Out of curiosity I was wondering how long a typical eurorack module lasts? Do they go for years with no issues or can some of them burn/fry themselves out with too much usage?
Posts: 1
Participants: 1
Cpu usage limit
@Kooshan wrote:
Ok i loaded a regular multisample instrument pad( mfm_padsynth_01) from the download section of this website and i’m unable to use it because whenever i play a chord renoise stutters and cpu usage goes insane . I ‘ m on win7 and running a very decent cpu(i7)
Have to say i have no problem with any daw here , what ever i do
Posts: 1
Participants: 1
[H445] MC505 –Competition (crystalvortex.ca) By PanosK
@stoiximan wrote:
Man these competitions are truly forcing me to make music.I hope you friends take part.This is the track i submitted.Be careful on the volume there are some nasty bass frequencies later on the track
Posts: 1
Participants: 1
Sync LFO, Quantizer
@Sajmund wrote:
Sync LFO, so that, when you adjust the frequency parameter, it stays within LPB
you know without the 2.34 and 8.56 etc… you know
1,2,3,4,5,6,7 etc LPB right?
And the quantizer, yeah
Yeah, like a real quantizer
So that if you put an, lets say, random LFO through the quantizer, you can quantize to scales and so on
Posts: 1
Participants: 1
Loop markers in sample editor help
@stoiximan wrote:
Is it possible to record the loop markers from the sampler in the pattern editor?I want to record when i change the marker position, you know like when you right click on a device and the data goes to the pattern
Posts: 1
Participants: 1
Smooth CV changes from Renoise
@liimo wrote:
Hi,
I have an Endorphin Shuttle Control that changes midi into CV for my eurorack. It supports a pretty wide selection of different inputs and works perfectly with for example a Digitakt that sends gates, v/oct, aftertouch and pitchbends.
I’d love to control it with Renoise to achieve a proper song mode. but I haven’t figured out how to transmit anything besides notes to v/oct. That obviously works, but it’s pretty clumsy and I’d love to use the graphic automation.
Posts: 1
Participants: 1
(Piano House) EatMe - Tuna de la Piano
Duplex mapping for nanoKONTROL Studio
@koskhun wrote:
Hello,
Please find an adaption that I did for a Korg nanoKontrol Studio.
I’m still searching a way to set block loop size on the wheel.
An other problem I have is setting “Buttons3” group as trigger for parameter automation record. I would like like to set the record_method (disabled, interleaved or punch-in) with those buttons for each parameter respectively, but can’t find a way to do it. Could the in the .xml help?
If I try with some application like
Automateable = {
mappings = {
record_method = {
group_name = “Buttons3”,
},
},
I have following error:
xOscClient: Renoise OSC server was found at 127.0.0.1:8000
*** .\xLib/classes/xAutomation.lua:114: variable ‘xStreamPos’ is not declared
*** stack traceback:
*** [C]: in function ‘_error’
*** [string “local mt = getmetatable(_G)…”]:29: in function <[string “local mt = getmetatable(_G)…”]:24>
*** .\xLib/classes/xAutomation.lua:114: in function ‘record’
*** .\Duplex/Applications/Effect.lua:520: in function ‘on_change’
*** .\Duplex/UISlider.lua:723: in function <.\Duplex/UISlider.lua:720>
*** (tail call): ?
*** .\Duplex/UISlider.lua:368: in function ‘do_change’
*** .\Duplex/MessageStream.lua:368: in function ‘?’
*** .\Duplex/MessageStream.lua:378: in function ‘_handle_or_pass’
*** .\Duplex/MessageStream.lua:167: in function ‘_process_fader_message’
*** .\Duplex/MessageStream.lua:140: in function ‘?’
*** .\Duplex/MessageStream.lua:146: in function ‘input_message’
*** .\Duplex/Device.lua:582: in function ‘_send_message’
*** .\Duplex/MidiDevice.lua:612: in function ‘build_message’
*** .\Duplex/MidiDevice.lua:555: in function <.\Duplex/MidiDevice.lua:202>
Thanks in advance for your help.
–[[----------------------------------------------------------------------------
– Duplex.NanoKontrol2
----------------------------------------------------------------------------]]–
duplex_configurations:insert {
– configuration properties
name = “nanoKONO”,
pinned = true,
– device properties
device = {
class_name = “NanoKontrol”,
display_name = “nanoKONO”,
device_port_in = “nanoKONTROL Studio”,
device_port_out = “nanoKONTROL Studio”,
control_map = “Controllers/nanoKONO/Controlmaps/nanoKONO.xml”,
thumbnail = “Controllers/nanoKONO/nanoKONO.bmp”,
protocol = DEVICE_PROTOCOL.MIDI
},
applications = {
Mixer = {
mappings = {
solo = {
group_name = “Buttons2”,
},
mute = {
group_name = “Buttons1”,
},
levels = {
group_name = “Faders”,
},
},
options = {
invert_mute = 1,
follow_track = 1,
take_over_volume = 1,
pre_post = 2,
}
},
Effect = {
mappings = {
parameters = {
group_name = “Encoders”,
},
device_prev = {
group_name = “MARKER”,
index = 2,
},
device_next = {
group_name = “MARKER”,
index = 3,
},
}
},
– Navigator = {
– mappings = {
– blockpos = {
– group_name = “Transport”,
– index = 1,
– },
– prev_block = {
– group_name = “Wheel”,
– index = 1,
– },
– next_block = {
– group_name = “Wheel”,
– index = 1,
– },
– }
– },
Transport = {
mappings = {
loop_pattern = {
group_name = “CYCLE”,
index = 1,
},
goto_previous = {
group_name = “Pattern and Track”,
index = 1,
},
goto_next = {
group_name = “Pattern and Track”,
index = 2,
},
block_loop = {
group_name = “Transport”,
index = 1
},
stop_playback = {
group_name = “Transport”,
index = 2,
},
start_playback = {
group_name = “Transport”,
index = 3,
},
edit_mode = {
group_name = “Transport”,
index = 4,
},
follow_player = {
group_name = “MARKER”,
index = 1,
},
},
options = {
pattern_switch = 2,
pattern_play = 2,
}
},
TrackSelector = {
mappings = {
prev_track = {
group_name = “Pattern and Track”,
index = 3,
},
next_track = {
group_name = “Pattern and Track”,
index = 4,
},
select_track = {
group_name = “Buttons4”,
},
},
},
}
}
Posts: 1
Participants: 1
Aeolian (Piano Electronic)
@Redman wrote:
Little piano based track I made inspired by Erik Satie. Wanted to create a semi-randomised song so I took two bass notes, four chords, and six notes for melodies and made renoise randomly select them. Glitch percussion was also randomly selected from a pool of samples. Everything else was sequenced intentionally.
Tried to master the track but just ended up destroying the overall sound so I just went back to an older mix of it instead even though it’s a fair bit quieter. Might try again but for now this is as far I’m gonna edit it.
Need to get a better piano VST as well, playing chords on this one makes the transients too boomy or loud or something, it’s like the notes stack and the amplitude spikes. Anyways it is what it is, might fork out the cash for Pianoteq 6 sometime soon instead.
Posts: 1
Participants: 1
HeartBeatHero - Trinity (Synthwave)
@alien7 wrote:
A track from my new album released in April. All done in Renoise my favorite tracker.
Tell me what you think.
Posts: 1
Participants: 1
Midi clock renoise-vcv rack
@effeta wrote:
hello everyone
I m having fun playing with the renoise an the rack in Linux, and I have a rudimentary synch between the renoise an the sending and receiving MIDI and CV bidirectionally. using triggers to send start and reset signals to the clock and LFOs
I m trying to receive the midi clock from renoise in the rack but I can not find a module suitable to convert the Midi clock to BPM ,is this possible? any clue about the best workflow?
thanks
Posts: 1
Participants: 1
