Renoise Forum

Just let a “Thank you” to them…

And maybe more for Taktik…

2 posts - 1 participant

Read full topic

Hi,

When I duplicate a row patterns, a # is added at the beginning of the name of the pattern, does anybody know if I can turn this off? I would just like to have the same name, or an empty field name, like in the source patterns I duplicated.

I’m always busy deleting the # after duplicating a row of patterns

Thanks

10 posts - 4 participants

Read full topic

There are some plugins that have XY values + a Touch parameter. Korg Kaoss Pad being one of the best examples. XY Pad seems visually shows that its receiving touch data (click and hold) but it would be amazing if that could also be assigned to a parameter on an additional Setup button. For Kaoss Pad that would be basically to turn the fx on and off, but seems like this could be used in any number of creative ways for any plugin.

14 posts - 3 participants

Read full topic

PIKOCORE XL sound demo

Introducing the limited edition Infinite Digits Pikocore XL DIY kit by Erica Synths!

Features

• a lo-fi music mangler based on the Raspberry Pi Pico (brother of the nyblcore).
• capable of holding 8 minutes of 8-bit 33 kHz monophonic samples.
• powered by a single alkaline AAA battery for up to 3 hours or by powered by USB-C.
• tempo-synced with a selectable BPM between 60 and 300, with samples mangled by beat-synced effects (stutter, retrig, gate, tunneling).
• loaded with real-time effects like a resonant filter, timestretching, volume, and wavefolding.
• sequenced with a 128-step sequencer with recording/playback
• saved and loaded via EEPROM for instant patch recall.
• able to load custom firmware, new samples, all through USB-C.
• sync-compatible with Pocket Operators.
• open-source, wonderfully hackable.

based on this device

160 Euro

2 posts - 2 participants

Read full topic

HI There’ New here¡

I was starting my journey here with Renoise and half of my plugins no matter if they are vst3 or 2 are not showing up.

All the plugins are original and activated just installed vst3 versions only and then after try all in Ableton but since they not showing up installed also vst2 with same luck. I Donny know why exactly are not showing up. All they are well installed and activated and working in other Daws.

I don, t want to use or try Au versions, even if I,m in Mac I don’t want lo lose compatibility now or in the future.

Here is the list:
Audiomodder riffer 3 no vst3 or 2

Serum 2 not showing only show serum fx

Woodland studio Wolsa bass no vst3 or 2

Surge synth team stochas no vst3 or 2

Algonaut atlas no vst3 or 2

Ilements drop the bass 01 no vst

Thanks in advance¡

9 posts - 4 participants

Read full topic

Hello everyone…

Could a chromecast work if controlled by a smartphone which also serve as an ‘internet box’ for the chromecast?

It’s for my mother…

Have a WIFI printer which doesn’t work like this

Thank you in advance…

4 posts - 2 participants

Read full topic

hi, anyone able to tell me what the connection between 0%-100% in Global Groove, and 00-FF in Delay Column is? how would i go about figuring this out?

1 post - 1 participant

Read full topic

so, i’m a bit thrown now, i don’t know where in Renoise is the menu entry “Phrase Mappings”.
i can of course map menu entries to Phrase Editor, or Phrase Grid. but what’s Phrase Mappings?

1 post - 1 participant

Read full topic

I have my sample collection on pCloud with a 100 Mbps download speed. When I load samples (do not have to be large) into Renoise, Renoise sometimes hangs and I have to kill it, because it does not recover by itself. Even after pressing “wait”. Same happens with Reaper.

Seems pCloud transfer is sometimes pretty slow. As a first solution I set the timeout value higher from 5 s to 30 s as described here via the dconf editor:

1 post - 1 participant

Read full topic

Use Markdown, BBCode, or HTML. then open raspberry pi riscos and open cab.exe and extract circle-xy from web page and repost as “C” in .txt generate framed window with button that opens stolen array of interchangable C-HTML, and then build up to an exportable of itself type system.

<-clinks beer-> how far can you get in cmd prompt in one go

1 post - 1 participant

Read full topic

Does anybody know what breakbeat was used in the song Öngyilkos Vasárnap by vsnares

Öngyilkos Vasárnap

I cant seem to find it anywhere and I really like the sound of it

1 post - 1 participant

Read full topic

Hi all, I am writing metal in renoise and one of the things I would like to see:

The VST I use (The Odin III) has a feature where a string can be selected by outputting notes on a certain channel:

It would be a very nice to have to be able to set the midi channel for a certain column inside a track.
(And yes, I realize I am likely the only person on the planet that needs it, so unlikely to happen, but I did want to at least put the idea out )

Regards,

BlackStar / Edge of Panic ^ Tribal Rage

2 posts - 2 participants

Read full topic

Hi all, finally I can share months of work:

My Reign of Terror

This track was entered in the Revision 2025 Streaming Music Compo, and almost made it through preselection We needed one more point from the judges and it would’ve absolutely destroyed the hall.

1 post - 1 participant

Read full topic

I never had this problem with Renoise at all in Linux Mint 21.3 and prior.

But doing a clean install of 22.1 (not an “upgrade” from 21.3, but completely nuking the drives and installing from scratch)… Renoise now behaves in a completely unusable way. While it “plays” the songs, the audio is very choppy/skippy, and certain graphical elements such as the phase-view box animate like slideshows.

The flavor of Mint I installed was 22.1 Cinnamon edition.

Any ideas what might be going on?

Edit: an additional detail that might be useful is that when turning on the Metronome for a default blank song, it doesn’t sound 100% evenly-spaced like it ought to.

4 posts - 2 participants

Read full topic

Can I install a regged Renoise 3.4.4 on a new M4 Mac Mini and at the same time run it on a PC

14 posts - 2 participants

Read full topic

Dear people

I am working on a piano number, I used the Space Piano sample from renoise, and also added violin to it, I don’t really know much about usable samples. Most of the ones that are available have already been played as a melody, I also see a lot of samples on the internet as junk, you can not use the notes abcdefgab to get a good melody that runs with the piano.
Does anyone know a solution or explanation for this. I would like to have the same sample as space piano but also in violin, if anyone knows something I would like to hear it, kindly consider

3 posts - 3 participants

Read full topic

I’d like my username to be changed to “extraoctave”

1 post - 1 participant

Read full topic

Hi,

I just wanted to make a longer recording with the loopback function of my sound card (Focusrite 2i2 4th Gen).

After about 4 hours of recording without an error message, I stopped the recording (clicked on “Stop” and “Done”). The waveform that was subsequently displayed in the sample editor was only 46 minutes and 36 seconds long. The temporary file %LOCALAPPDATA%\Temp\Renoise-0-17240\Renoise_TmpPath-0-0\TempSampleRef1.wav was about 5 GB in size.

Maybe it has something to do with size limitations of WAV files, but it would be helpful if the maximum recording duration was displayed before recording or a warning message could be displayed as soon as the maximum is reached. Alternatively, perhaps the temporary WAV file could be distributed over several temporary files once the maximum size has been reached, so that longer recording times would be possible?

Best regards

1 post - 1 participant

Read full topic

Hi everyone!

I’d love to hear your thoughts on an idea for a simple tool designed to help musicians get past creative blocks while working on a track.

The idea isn’t to generate something from scratch, but to build on what’s already there — like one or two notes, a short phrase, or a pattern.

Think of it as a kind of creative support tool — it takes existing material and offers possible continuations based on simple, intuitive transformations: repeat, transpose, shift rhythm, insert a pause, and so on. Nothing overly complex — just enough to help get the flow going again.

What I’d love to hear from you is: what kinds of transformations or logic would you find useful in this kind of tool? What would help you personally when you’re stuck?

At the moment I am collecting information to formulate the technical task and how it could be implemented. I would be glad to hear any thoughts, even strange ones.

Have a great day!

1 post - 1 participant

Read full topic

Hello,

This is a new track with Renoise and VST from Roland + Arturia Minibrut, pigment and AcidV.
Guitar by a friend : Pablo

Intro is hard rock, arpeggio 8-bit, next is solo guitar and electronic/demoscene for finish

Good Listening !

2 posts - 2 participants

Read full topic