Feed aggregator
Renoise en samenwerking asio4all laten opstarten problemen
does anyone happen to know about drivers in windows and how to start up Renoise 3.4.2 and start assio4all in the bar at the bottom of windows so that I can set my sound settings correctly and therefore also spread the sounds over my 5.1 sound set , when downloading asio4aal, no registration or license is requested, it just does not work or does not want to start in my windows 10. and where the problem is, it is really annoying for me that renoise does give the options to distribute seakers in your track 5.1, but no drivers or information provided.
hopefully clear solutions
3 posts - 2 participants
Asio4all prablums in my renoise will not starting in windows 10
dear people i have a problem. I have a sound installation speaker set 5.1
and must use asio4all with renoise that always worked, but by fiddling with the settings, it is by accident that asio4all no longer wants to start in Windows 10 at the bottom of the taskbar, and it is also impossible to divide the track speakers in renoise, can someone give me advice or explain how I can solve this problem again to get back to being busy with music, kind regards marc de zeeuw
2 posts - 2 participants
Kontakt 7 problem
New Kontakt 7 player works ok, but window works bad. First time I insert Kontakt 7 player is working, but when I deselect this plugin and select it again - window never shows. I must save and load project and then (and only then) Renoise can open plugin window. Only once.
4 posts - 2 participants
[windows 10] Oi, grandad vst3 not working correctly
Hey, I’m trying to get the following free granualar vst3 plugin to work in Renoise; GitHub - publicsamples/Oi-Grandad: 4 Voice Granular Synth
…but the audio craps out after importing a wave file into it and pressing a key. The cpu maxes out and the master out scope glitches with the offset stuck to the top.
From the logfile;
“Vst3Plugs: Instantiating: C:\Program Files\Common Files\VST3\oi grandad.vst3…
Vst3Plugs: Failed to apply initial controller state to controller (not critical)
Vst3Plugs: Failed to suggest speaker arrangement (not critical)
Vst3Plugs: Failed to change audio bus connection state of ‘modularsamples: oi grandad’ - Result: 1
Vst3Plugs: Failed to change audio bus connection state of ‘modularsamples: oi grandad’ - Result: 1
Vst3Plugs: Failed to change audio bus connection state of ‘modularsamples: oi grandad’ - Result: 1
Vst3Plugs: Failed to change audio bus connection state of ‘modularsamples: oi grandad’ - Result: 1”
Perhaps this can be fixed on the Renoise end?
2 posts - 2 participants
Waveshell not found, macos 12
Strangely waveshell is not found after restarting Renoise. Then if I do a rescan (I do this manually), the song can be loaded without a problem. But after restarting Renoise, the problem appears again. So it seems that the waveshell entries in the plugin database are not updated or similar…?
1 post - 1 participant
When your earpads look like this
…It’s time to replace them.
After waiting way too long I finally replaced the ear pads on my Sennheiser HD600. What a world of difference! Not only is it much more comfortable to wear, the sound quality also notably improved.
Years ago I had that same experience with my DT990 when I replaced those pad. Made so much difference. So if you’re ear pads are all gross and flattened out, replace them. It’s worth it!
1 post - 1 participant
Mac vs Linux user experience
Hi, after long time using Renoise on mac - i’ve installed it on old laptop (which even runs Manjaro slowly).
All Renoise demo projects run fine, no laggy UI, no any performance degradation…
the thing that bothers me - i cannot get same amount of fps/response on mac, no matter what i do. It’s really behaves awesome on linux… Totally different experience
1 post - 1 participant
Only able to interpolate values in the delay and fx column?
Hello! I bought redux today. I am having trouble interpolating values in the panning and volume columns. I start with 10 and end with F0, Select using ctrl b and ctrl e, and press ctrl l or e, but nothing happens. It doesnt work when I right click on the selecting and press interpolate from the drop down menu. I am able to interpolate values in the delay and fx columns, however.
What am i doing wrong?
any help is appreciated, thank you!
1 post - 1 participant
Keyboard Key Transpose +12 possible?
Hello,
is it possible to adjust the keyboard range for the whole poreset +12 semitones high. I mean, that when i play C2 that in Redux C3 sounds.
I mean not the global pitch change on the top right - that transposes all samples - and changes the sound.
1 post - 1 participant
ChatGPT (openAI) will not make our tools
It’s not quite there, but I’m still very impressed so far. It’s only a matter of time
PS. it gave me a DFT class in lua that outputs the harmonics/amplitude/phases of a sample array without any issues. It’s a bit spooky…
1 post - 1 participant
Some chaotic breakcore
Right click Macro to control in Phrase editor
Does this feature not exist in Redux? Was hoping to be able to program the macro knobs in the phrase editor but I’m also very new and probably missing something?
1 post - 1 participant
Is the akaizer tool for renoise still available?
There is only a download to the windows version on the akaizer project website and all links leading to the previous renoise tool don’t work. I was wondering if it is still possible to use this tool in renoise? If not it would still be cool to share some workflow tips when using the executable version because I just want to optimize workflow.
1 post - 1 participant
What is the newest 32-bit only macOS build of Renoise?
Hi, I’m currently using Renoise v3.1 on my macOS Mojave running in 32-bit mode, running 32-bit plugins.
Is there a newer version of Renoise that still supports macOS 32bit?
1 post - 1 participant
Preset Settings deleted after new start
Linux Mint 21 Cinnamon / Ardour
Hello,
the preset settings in the right browser (Instruments) don’t save the setting. After closing Ardour and re-open, the settings are empty. That worked in the past - 2 buttons have saved a path, i had set. Redux brings a message, when i save, that the setting is saved - but unfortunately only as long i work in this project. Closing and reload and the setting as away.
My be a config file that has to be reseted to let work Redux again…?
1 post - 1 participant
How to adjust the default place for sounds in Redux on LInux Mint
Hello, i have a big please: Can anyone give me solution, how to adjust the default path to the sounds.
I saved my sounds on a 2nd harddrive in my device and in Redux is not able at the moment to adjust this.
I love Redux and i think it’s in the Linux World the best Sampler for DAWs on the market. But please develop Redux and give him an option, that i can set the default path.
Many thanks in advance.
Greeting, Stefan
1 post - 1 participant
Process monitor for vst cpu usage
I might just be missing a core feature already implemented here, seem to remember something of the sort, but here goes
I throw a lot of vsti’s and vst’s at renoise, but sometimes there’s obviously something using way too much cpu quota. This can be hard to identify, even using sandboxed plugins, as then the process will usually be identifiable in a task monitor, but the vst itself left unidentified, the only option to close it. (Built in plugins obviously don’t get the same treatment). Is there any chance of this being implemented as a tool or a feature, have I just missed something?
Cheers
_PolarTimeCas7
2 posts - 2 participants
Mixing with Renoise and Mastering with Ardour
Hi Folks
I need advice on loudness mastering. I record a song from Renoise output to Ardour input via Jack using these maximizer settings:
With this setting I get a non-clipping audio, relatively dynamic that peaks at -0.1 db. When I analyze this audio with ardour’s loudness analysis, I get:
Then I use Ardour’s loudness assistant to keep dbTP at -1.0 dBTP and I don’t set a target for LUFS
As a result of exporting like this you can see, my dBFS peak has been reduced to -2.6dBFS and True peak at -1.0 dB and LUFS at -12.1. If I set a target for LUFS with the assistant I get much lower dBTP (around -3.0)
Is this approach a correct one to adjust loudness for streaming platforms, should I target LUFS instead or am I missing something else?
Thanks
1 post - 1 participant
Composers desktop
So I Installed composers dekstop +soundshaper interface but it seels that there are less processes available .
I’ve got only 15 processes to choose from and most of my favourite ones like distort are missing
2 posts - 1 participant
Mechanical Lego Drum (track) Sequencer / Robot Musician
This is too cool (or ‘awesome’ for you youngsters )
https://www.youtube.com/embed/BlaY8kSTO28
As I commented on that page, he has actually built what could be a “mechanical Lego musician”, if the output piezo’s were / could be converted to MIDI outputs !
1 post - 1 participant
Pages
