Feed aggregator
Mystery volume/levels issues, maybe due to pipewire/jack?
I just upgraded to the latest Ubuntu (24.04.1) and did a fresh install, so I also reinstalled all my software, including Renoise. As part of the upgrade, the system now seems to be using pipewire for audio routing. There may be other updates to the Ubuntu Studio packages at issue here too.
My problem is intermittent: I open a song that was working perfectly fine, and it’s a crapshoot whether it will work or not. It seems like a levels issue, because when the song won’t play the meter at the top of the window is all the way at max and Renoise is probably clipping the sound. Adjusting the master volume doesn’t seem to fix it. My instrument 02 seems to be the issue–it’s a bass patch from Surge XT. When I test play a note on the keyboard, the levels for the track shoot up to clipping and stick, and all I hear is a click like unplugging a speaker jack. The levels stay there until I press a note in another track, and then the old track drops and the new track has a sticky, clipping note instead.
The mystery about it is that if I reopen the song, that might fix it, and the song and patch will play perfectly normally. Or it might not, and I might need to reopen it. It seems like there’s some kind of wacky thing going on with levels–previously I was getting very garbled playback, and it turned out the master volume was way up there and clipping constantly. Any ideas what might be going on? Why do these clipping levels keep sneaking back in? (I have saved the song with lower master volume level and auto level. Doesn’t solve it.) This was not an issue before the upgrade to the OS.
I know this might be a question for the Linux audio forum but I thought I’d try here first.
1 post - 1 participant
State of the tools page
When you go to Renoise Tools | Renoise and click Browse the complete Tool catalog
- It defaults to Renoise 3.2
- Renoise 3.4 doesn’t even exist in the dropdown
- 3.3 is spammed up with multiple copies of … wordle (?)
These together make it look like tool development has stalled, only looking into the this forum reveals otherwise.
1 post - 1 participant
Forum does not allow sharing of .XRNM (Midi Mappings!)
I am unable to upload a Renoise-specific MidiMapping to the forum because the format is not allowed!
is there some way this could be fixed. I have a friend over on the forum who has bought an Akai MIDIMIX and I cannot share with them the midimapping for it.
which was created by Renoise.
2 posts - 2 participants
Rock Jacket - arcadessa
Rock Jacket is my side project, here’s a short cohesive little release.
https://rockjacket.bandcamp.com/album/arcadessa
‘pelimusa’ starts us off catchy and introduces the elements of the release - rapid drums with chiptune bleeps.
‘artefakti’ has some more musical exploration in the image of old arcade cabinets.
‘turbo’ revolves around distinguishable rhythmic patterns augmented with bass melodies.
‘vastus’, while having its own theme, features a medley of the other 3 tracks.
1 post - 1 participant
VideoPad Video Editor 16.34 Бета — Скачать для ПК бесплатно на русском
NCH VideoPad Video Editor 16.34 Бета превратился в фундаментальную способность в современном мире, управляемом веществом. Независимо от того, делаете ли вы профессиональные записи или расслабленные нарезки, важно иметь правильное программное обеспечение. Более того, VideoPad Video Editor, созданный NCH Software, предлагает доступный и простой для понимания ответ как для начинающих, так и для опытных редакторов.
Download Free Link
1 post - 1 participant
Instr automation device - how to set parameter names?
i want to use some meta device, where i can set the parameter names myself? is it possible, please?
i really need this.
any meta device with sliders, please.
1 post - 1 participant
Can vb:switch have individual "slot" widths?
i’m about to modify my Wipe&Slice settings a bit by adding BeatSync “OFF” but I’d like to not increase the width of the vb:switch object. is there a way to set individual vb switch element widths?
so off could be width=20 but a longer text could be width=300 or sommat
1 post - 1 participant
VCV Rack new module: Pluck
Digging the new module from VCV Rack: Pluck.
1 post - 1 participant
Disabling tools removes their keybinding
A minor glitch. While trying to find a buggy tool I had to disable a few and noticed that by doing so it removes their keybindings, shouldn’t that only be happening on uninstall?
4 posts - 2 participants
Instrument: Option for forcing VST-specific sampling rate
Once in a while I notice certain VSTs don’t account for the host software’s sampling rate, and calculate their oscillations/etc under a hard-coded assumption that the host software uses 44100hz – for example, older versions of ZynAddSubFX exhibited this problem. So if Renoise uses a different native sampling rate other than 44100hz, the VST produces off-key sounds.
For an individual Instrument which uses such VST plugins, an optional setting that would let the user select a forced VST-specific sampling rate, and then Renoise would natively upscale/downscale the outputted sound to transparently sound natural under Renoise’s native sampling rate, would be very helpful.
1 post - 1 participant
Convolver Reload Only Activates After Loading IR If Preset Is Not Init
Just as the title says. Also does the same thing after choosing a preset then selecting ‘Init’ again.
1 post - 1 participant
Modulation External Editor Doesn't Resize For Macros
In the Modulation section, insert an Envelope or Stepper device and hit the ‘Ext. Editor’ button. Now open the Macros panel. The External Editor will not shrink to make room. Likewise, opening the Macros panel before pressing the ‘Ext. Editor’ button and then closing Macros again will not expand the External Editor into the space available.
1 post - 1 participant
How do you do pitch bends and portamento in Redux?
I see that Redux has a pitch bend slider, which can be automated using MIDI pitch bend commands, but it doesn’t actually affect the note’s pitch.
2 posts - 2 participants
Renoise Matrix + Magnifier Win11 issue
A small compatibility issue.
In the Renoise Matrix panel, using “CTRL + ALT + mouse wheel rotation” allows you to zoom horizontally of the Matrix.
If you use Windows 11 Magnifier, it seems that this control is stolen by Windows 11 Magnifier, so it doesn’t work, even if Renoise is in the foreground…
3 posts - 2 participants
Track presets - idea
Maybe I’m getting lazy on my old days but hey…
We have all made the perfect track for some instrument and want to reuse it later, the device chain is obviously tailored to the instrument so wouldn’t it be nice to have the ability to save a track with its devices and instruments used in the track and maybe just the currently selected pattern notes.
Maybe even save a whole group of tracks as a preset would be cool and then a nice way of organizing these presets… maybe we could make this as a tool but then it should be possible to save to disk?
13 posts - 4 participants
Group Play/off button disappears when scaling up
i just bought a 43 inches 4K screen so i need to zoom in a bit. And the play/off button from the groups disappears
1 post - 1 participant
Fast scrolling through patterns in Matrix stutters (Renoise 3.4.4)
Description:
Scrolling isn’t smooth in Renoise 3.4.4 but stutters and jags
Window 10, Nvidia RTX 2070 Super with latest drivers
32gb ram and 8 cores, Babyface Pro etc
Enough hardware for smooth scrolling
Steps to reproduce look like this:
- Launch Renoise 3.4.4
- Open any the song
- Click in the Pattern Matrix
- Press ctrl down
- Wait for acceleration
Expected results:
Smooth scrolling, straight down like it does in Renoise 3.3.1 for example.
Actual results:
It goes 2 lines up, one line down, 3 lines up, 2 lines down.
Jumps all over the place
Extras:
video downloadable here: Unique Download Link | WeTransfer
11 posts - 4 participants
HeartBeatHero - This Is My Time (EDM)
Can a tool call functions from another tool, aka "go outside it's own sandbox"?
i’m wondering if i could create a button inside my tool, that can run a function from another tool? i don’t want to include the tool / lua code in my tool.
3 posts - 3 participants
How to apply FX Chain to each sample slice
Sorry if this has been posted before - but I was wondering if after I slice a sample, and lets say each slice I have linked to a different FX chain , so each sample has its own effects. Can I reneder each slice to then not require the effect chain , but the slices are still maintained so i can further manipulate each slice?
I thought the render slices destructively would do this but it seems to keep the FX chains intact, infact I do not know what the point of rendering slices destructively is if all it does is just maintain the original sample ?
8 posts - 3 participants
Pages
