Feed aggregator

I have changed the octave Up and Down on the settings so It fits my laptop.

But when I change octave up or down ALL the other notes on the whole f-kin pattern changes in the same time WTF Why do you even want that? HELP PLEASE!

1 post - 1 participant

Read full topic

Some slightly spoopy stuff for this halloween. Bits of synth, samples, loops and good ol’ violin. Nothing too crazy, but I hope you’ll like it anyway.

Fun fact, Soundcloud suggests this is should be Jazz. What on earth are they smoking!?

1 post - 1 participant

Read full topic

Hi all,

As a result of discussion in this thread, I’ve made a pretty functional granular synthesis instrument in renoise using phrases and the sxx command to trigger sample slices. It has some quirks and limitations, certainly, but is a good start toward native granular synthesis in renoise. Check it out here:
ReGranulizer v1.xrni (1.0 MB)

Read the comments when it opens, drop in a sample, and experiment!

Happy to answer any questions in this thread if anyone has any.

peace

1 post - 1 participant

Read full topic

Updated from: Original Thread

v 0.8

ledger.scripts.CheckTimesInstrumentUsed_V0.8.xrnx

• Added a button to list all unused instruments in the song

Menu entries are in Intrument menu and tools menu (Ledger`s Scripts)

Shortcut: “Check Times Instrument Used”

Choose instrument you want to check from popup and [UPDATE] button to re-scan / scan a newly chosen instrument

TEXT READOUT

-The top section lists the track indexes which have at least one note of the selected instrument
-The bottom section gives you a pattern/ line breakdown of any notes in the selected track

////

Another tool that could be useful along-side is taktiks Find and Replace:

https://www.renoise.com/tools/patterneditor-find-and-replace

v 0.8
Added a button to list all unused instruments in the song

0.71
–non-sequencer track message updated
0.7
–added joule’s speed improvements
–now when no notes are found in the selected track it will not list Pattern,Line multiple times. It just says:
NO NOTES FOUND IN CURRENTLY SELECTED TRACK X:
–improved instrument popup numbering to match renoises hex numbering

0.6
-code tidy(er)
-added multiline_textfield to contain/ wrap text properly

2 posts - 1 participant

Read full topic

I am currently using a 60% keyboard without arrow keys which is very frustrating so I am going to upgrade. However I am unsure whether to get a full size keyboard or whether I can get away without having certain keys. At the minute I’m just thinking about arrow keys but I’m wondering whether I can benefit from having a numpad and function keys. I’m pretty new to renoise so I am not aware of every keyboard shortcut. I don’t want to regret not getting a full size keyboard later down the road. Any advice?

1 post - 1 participant

Read full topic

Hey
I wrote an article on affordable first synths: Your First Synth

Mine was the Novation A-Station, which I still have and absolutely love! I bought a Darkstar XP2 after that which was…mehhh…not so great!

How about yours? What was it? Do you still have it?

midierror

1 post - 1 participant

Read full topic

Hey,
when I’m opening the plugin window for Pigments 3 (VST3 version) and drag it from my laptop screen to my monitor screen, the synth only appears in the lower left corner while the rest of the window is black. Also I cannot make changes or play the keyboard properly, as my mouse clicks are not applied where I click as the scaling does not work. I don’t have this issue when i am running the plugin in Ableton Live. Any ideas?

1 post - 1 participant

Read full topic

So I wrote some patterns in Renoise with fixed BPM. Then I rewired Renoise to Reaper and created some gradual tempo changes, but noticed that those changes effect sample pitch of some of the tracks.
It’s sounds pretty cool, like when you manipulate a vinyl record, but I’d like to be able to turn it off as it messes up any tonal part.
Another artifact is cutting off notes (making random chords staccato).
Couldn’t find the setting, I’d really appreciate your help!

1 post - 1 participant

Read full topic

hi ! you can find my Renoise songs at the following link : https://soundclick.com/MaurizioAmati; thanks for your comments.

1 post - 1 participant

Read full topic

Hi. Looking for a legit vendor? i fall on this https://24pharmahub.com/product-category/steroids/
buy-anabolic-steroids-online/coke/weed/cannabis/xanax/steroids
all i odered arived Sydney Australia my city.
[w.h.a.t.s.a.p.p] them [+1 (865) 888-0381].

1 post - 1 participant

Read full topic

Hi. Looking for a legit vendor? i fall on this
all i odered arived Sydney Australia my city.
[w.h.a.t.s.a.p.p] them [+1 (865) 888-0381].

1 post - 1 participant

Read full topic

Like topic says my Waves plugins suddenly vanished from Renoise.
I tried reinstalling the plugins, but it doesn’t seem to help. I tried rescanning plugins multiple times to no avail.
I tried restarting my computer several times…no luck.
Does anyone know how to solve this?

I’m on Win 10 btw.
I recently unplugged the power chord from my computer yesterday as i was cleaning and refurnishing and when i started the computer today it booted into a mode where it asked if i wanted to open setup or just start normally. I didn’t think much of it, but could it perhaps have something to do with my issue?

1 post - 1 participant

Read full topic

It would be nice to be able to color code different notes in the tracker.

All C’s red all Ds green all D#s blue etc

Be useful for the same reason color coded notes are useful in the piano roll in HookPad or Bitwig. Just that much more efficient in visually analyzing harmony

1 post - 1 participant

Read full topic

• (1) When playing a Poly-AT compatible instrument with a Poly-AT capable midi-keyboard, the Poly-AT information is transmitted and received correctly as shown by the midi monitor, but it will not trigger the Poly-AT associated function.

• (2) During live play, Poly-AT will partially work, as soon as the same key is pressed an octave higher or lower. e. g.: C-4 alone = no Poly-AT. C-4 + C-5 = poly AT works for C-4, not for C-5.

• (3) Poly-AT data is being recorded in the pattern editor (Volume Column), however only a fraction of the supplied data (transition from one value to another) actually gets recorded, with a lot of void pattern lines, where no entries in the vol column are being recorded

• (4) Channel-Aftertouch works OK when played live, however it suffers from the same low detail when being recorded into the pattern during live play. see (3).

I am pretty certain, that this is not a setup issue, as the same problem persists on two different machines with different midi hardware, yet any other host will handle Poly-AT as expected on both systems.

1 post - 1 participant

Read full topic

So I’ve been using Renoise for a few months now, I’ve recently started to implement destructive rendering to my workflow but to my surprise the DSP rendering on Renoise is quite weird. I don’t know if I’m doing something I shouldn’t but everytime I render track DSP or sample DSP it sound totally different from the live processing/playback. I made two projects exemplifying my problem:

2 files sent via WeTransfer, the simplest way to send your files around the world

(sorry for the external link but I wasn’t able to directly upload them here)

I’m quite disappointed about it, maybe I’m just too dumb. But here some observations about the projects:

1 - The pattern rendering works fine, no difference.
2 - I made left a spare clean sample in the projects in case anyone feels like testing this themselves
3 - My samplerate is set to 48khz.

Can anyone help me on this? I’d highly appreciate any insight on how to make the DSP (both track and sample) works properly.

Cheers!

1 post - 1 participant

Read full topic

Made usinging Surge VSti and some samples

1 post - 1 participant

Read full topic

Sometimes when I open the instrument plugin menu in renoise (linux 64-bit, on the fluxbox DE if that matters) the menu instantly disappears again as soon as I click it. Restarting renoise fixes the problem but then it randomly seems to happen again. Here’s a video capture: bug

1. Open the instrument plugin insert menu

Menu stays open

Menu closes quickly (see video)

1 post - 1 participant

Read full topic

Using Renoise to trigger my Akai S1000. My midi controller is connected to a MOTU midi express 128, then to the Akai.

The Akai is set up with drums on midi channel 1. Bassline is on midi channel 2.

Renoise has track 1 drums, track 2 bassline. I set up 2 midi instruments - both inputs are express 128 port 1, channel 1 (my controller). One output is express 128 port 1, channel 1, assigned track 1 (akai drums) and the other is express 128 port 1, channel 2, assigned track 2 (akai bassline)

I’m trying to “select” either midi instrument to JUST play the drums or the bassline. Tried a bunch of different stuff -

1. Setting up both instruments input to port 1 channel 1 plays both the drums + bassline at the same time
2. Setting one instrument input to channel 1 and the other input to channel 2 just plays channel 1 (akai drums)
3. If both midi instruments must play at once, it seems the only work around is turning off either track in the “track scopes” pane?

What are my options here? Is there an easier way I’m missing to JUST send either channel 1 or 2 into the akai, so it plays drums or bassline separately?

1 post - 1 participant

Read full topic

I’ve gotta say, I love this track! Sort of feels like the chemical brothers doing a more convetional house-style thing. Super simple but, for me, effective!

1 post - 1 participant

Read full topic

I would like to know if anyone is aware of any (if possible, free) software and plugins that can produce experimental textures and sounds. I am on a mac, by the way.

1 post - 1 participant

Read full topic