Feed aggregator

@Levvo wrote:

First song ever made in renoise! =D … God I love this software!

Posts: 1

Participants: 1

Read full topic

@Commercial wrote:

Hello I’m trying to get Renoise running on a Chromebook. I’m not sure if it’s possible, and to be honest i don’t have much experience with Linux through the terminal sandboxed on my chromebook.

I managed to get a download into usr/local and then ran the install.sh

I got a message saying installation of renoise SUCCEEDED and also one that says PAM seems not to be installed or configured for audio applications.

It added a renoise app icon into the chromebook menu, but this doesn’t open the app, so I’m assuming I’m missing something.

I’m on an acer chromebook 14 4gb. Linux 9 (stretch)

Like I say, I’m not sure if it’s even possible to run.

Any help would be much appreciated

Posts: 1

Participants: 1

Read full topic

@YoMoFo wrote:

Hi all
Just thought I’d share the first jungle tune I wrote on Renoise. Did it about 6 months ago. Mix is terrible, I am using 30 quid pc speakers that dont even register anything under like 47-48 hz :rollseyes: So it may be a bit rumbly. Possibly.
Cheers!

Posts: 1

Participants: 1

Read full topic

@Strotch wrote:

It’d be nice to be able to toggle track visibility in the pattern matrix, either manually or ideally automatically based on whether they contain pattern data or not.

Personally I don’t typically have pattern data in group or return tracks, and they end up needlessly taking up screen real estate in the pattern matrix. Example below where it’s showing a full 7 tracks that I don’t need to see.

Posts: 1

Participants: 1

Read full topic

@fiveuthu wrote:

I got the kick to punch through on every hit, no matter how thick the song gets by side-chaining it to the bass. The bass ducks every time the kick hits. My compressor of choice is the SSL buss compressor by Waves. Listen to the song to see how it sounds!

Posts: 2

Participants: 2

Read full topic

@YoMoFo wrote:

Hi all
A remix I did of stop what youre doing by Apathy and Celph Titled. Anybody else producing hip hop using Renoise?

Posts: 1

Participants: 1

Read full topic

@leaphion wrote:

Hey, so, I’m seriously stumped here.

I installed Granite Demo VST2+AU, Granulizer 2 Demo VST2+VST3+AU and Helm VST2+AU to my 10.14.6 OSX Mac Mini. After the installation I tried to find them in my Renoise 3.2.1, but to no avail. All the other plugins installed previous to them were found all fine, but those seemed to be totally missing. My Bitwig and Live 10 Lite found them nicely, so they should be findable.

• I checked that the .vst and .component files were in right directories. They were.
• I checked that the right directories were added to Renoise preferences. They were.
• I tried rescanning them. It did, but didn’t find them.
• I tried booting the machine, just in case if that would magically make them appear. It didn’t.
• I even removed the CachedAUs_x64.db, CachedFailedAUs_x64.db, CachedFailedVSTs_x64.db and CachedVSTs_x64.db. It made them again, but still didn’t find the new plugins.

Where to next? What can I try doing next?

Posts: 1

Participants: 1

Read full topic

@RolandCloud wrote:

Coming Soon Introduction Annouces JV-80 VST New Bring Released Features All Including Extra Waveforms Sounds General MIDI Improvement Major Fix Expansion Remember Future GUI’s Unlock Maximum Polyphony Voice Switch Mode For Waiting Requesting

Posts: 1

Participants: 1

Read full topic

@beatsgo wrote:

Thanks to Nyquist and Shannon, analog to digital (and vice versa) conversions of audio samples has been thing since for awhile. And Renoise has this implemented into an instrument feature called interpolation (or resampling). Obviously you can read up from the wiki, but what I want to talk about is a certain application: resampling lo-fi audio samples and reproduce analog variants.

Let’s take a A-7 triangle wave generated from the Custom Wave Generator:

If you apply linear interpolation

It’s very clear resampling the audio sample straightens out the waveform and produces a close to representation of a triangle wave. Sometimes due to the nature of the wave being resampled, the signal may not look pleasing at higher frequency.
So why is this important? Space saving! If you’re trying to save space in your project/computer this is great for this application. Now the only trade off is you need to use a little bit of CPU especially on low end PCs. These days CPUs are well made to the point I don’t think there’s not much tradeoff using Linear or Cubic Interpolation. Also depending on how the lofi sample is shaped, the interpolation can reshape it into not exactly what you expect, so experiment and look for different lofi-samples to your disposal!

Posts: 1

Participants: 1

Read full topic

@selecta440 wrote:

Hi all, hope everyone is keeping safe I am shy about sharing music but I am working on new things and I thought I would share what I have been working on in case anybody wanted to listen. I sometimes have a story or a scene in my head and then I try to make music for it and that is what I did here. Hope you enjoy (best with headphones)

Please stay safe,
TCA

Posts: 1

Participants: 1

Read full topic

@pigfront wrote:

Like title says, it would be nice to have a option turn on/off sandbox for individual plugins.

Posts: 1

Participants: 1

Read full topic

@Redman wrote:

[Solved]
Ignore this folks I actually just found out about the focus area in the manual there now so that fixed what I wanted to do

I use a mac and the keyboard shortcuts work but only inside the sample editors waveform window and the main pattern editor window. For as long as I’ve used Renoise I’ve never been able to figure out how to use them in the instruments tab, and sample list in the sample editor. For example when I want to rename a sample I’ll have to right click the sample in the sample list then select rename with the mousepad, if I try to use the keyboard shortcut cmd+R it just defaults to the sample waveform and runs the reverse sample process. How do I stop this and use the keyboard shortcuts the way I need to in the sample list and instrument tab?

Posts: 1

Participants: 1

Read full topic

@OlafFerguson wrote:

I recently acquired Orchestral sample libraries that dynamic is naturally associated with velocity.

I’d like to be able to map the keyboard velocity to my Sensel Morph in some way.

IE: This

If there’s some key combination that would set different values for the Velocity, that would also work.

Thank you in advance for your help!

Posts: 1

Participants: 1

Read full topic

@Jalex wrote:

Hey Folks!

Its possible and scriptble? )))

What do you think about support adlib instruments file in renoise?

Posts: 1

Participants: 1

Read full topic

@Rhythmersion wrote:

Hi All,
I’ve knocked up a mashup of Laurent Garnier’s ‘The Man With The Red Face’ and Danny Tenaglia’s ‘Music Is The Answer’, hence the title ‘The Man With The Answer’

Great memories of these tracks from back in the day when clubbing in my late teens

Here it is;

Posts: 1

Participants: 1

Read full topic

@toimp wrote:

For different genres i would use different templates. Would be nice, we could add more than one template.

Similar posts:
Multiple Song Templates? Beginners Questions - Renoise Hi. I want to save a few different song templates, as I work in 3/4 and 4/4 and 15/8 and 11/8 time. I can only seem to set the “default” song template. Is there a way to save multiple song templates without having to save them as songs? I guess I could just save a blank song instance of each time sig, but as other programs feature a template palette, I was wondering if I have somehow overlooked Renoise’s. Cheers.

Posts: 1

Participants: 1

Read full topic

@srdjan wrote:

Hi there,

Does anybody has experience with Air Boom Drum Machine and Renoise?
I remember being able to use patterns in the previous version of Renoise.
Now I can’t use patterns anymore. I am getting only single drum instrument instead…
Thanks,

S

Posts: 1

Participants: 1

Read full topic

@le-perv wrote:

Hi! I have been using renoise for a few days, and here are a few major questions that have been flooding my head:

1. How can I view the notes that I am playing at the moment with the keyboard? To know which notes I am playing, I have to actually record them and see what they are. I know I can memorize these, but it would help to have some visual feedback. And with ScaleMate, memorization wouldn’t work since some keys start replicating other keys (would be nice to turn them off instead).

2. It would be cool to see a visual showing the key positions on the keyboard which were used in the track. So I don’t have to find the positions myself. Does something like this exist, as a plugin maybe?

3. How can I make “space” both play from the current cursor position and stop the song?

4. If I download some sample, how do I make sure it’s in tune? That is, if I play D#, how do I know the sample really is in D#?

5. When I play around on the keyboard and find something good, I usually want it recorded. And sometimes I would make a nice piece of sound with my keyboard, but can’t reproduce it anymore. Is there a place where my keypresses are constantly recorded, so that I could easily copy it without having to try to record it again? I find myself losing a lot of time trying to reproduce even a melody that I have nailed, because the escape + space makes me temporarily reposition my fingers and that breaks the flow. And then, to do a retake when I fail, I have to ctrl+z to restore the previous state. (by the way, why the 512 limit on the pattern length?) The solution looks simple: always run a pattern in some other window, which records all you play (and removes the long pauses). If this doesn’t exist, would it be possible to write a plugin and how hard? I am willing to write such a plugin, if it is possible. This is the biggest workflow problem I have so far.

6. Are there any plans to open source renoise? It’s marvelous software. I have read that it’s developed by only a handful of people, which view it mostly as a hobby project and not a truly commercial venture. Which is great, but all the more begs the question of why not release the code? The tools whose sources aren’t released to the public are at a natural risk of becoming defunct (for whatever reasons), and that would be a shame. Have the authors shared their views about this?

Would be glad to hear any insights.

Posts: 2

Participants: 2

Read full topic

@robert.random wrote:

I released this album yesterday. Last summer I challenged myself to create an album that has cohesive soundscape and tells a little story and I’m very happy with the outcome. It’s mixed together and flows smoothly from one song to another. Lots of different electronic genres blended together. Always fun to work with Renoise.

Bandcamp:

Other streaming sites:
https://album.link/fi/i/1503992964

Posts: 1

Participants: 1

Read full topic

@j105f wrote:

In the “Samples” area of the Sampler (with the “Samples” area in focus/selected):

Renoise crashes when I attempt to paste samples into a “note-off layer” or “note-on layer”.

This is the error:
A fatal error or crash occurred (unhandled exception in thread: GUI).

System specs:
Renoise 3.2.1 (64-bit)
Windows 10 (64-bit)

Posts: 1

Participants: 1

Read full topic