Feed aggregator

@pastormartin wrote:

Hello!

Posts: 1

Participants: 1

Read full topic

@arigy wrote:

AKAI Fire Integration for Renoise 3.1

This tool allows to use AKAI Fire FL Studio controller with Renoise tracker. It packs quite a lot of no-nonsense Renoise features to be available at your fingertips. Note: I made it for myself, so it may or may not suit your tracking style

Limitations

• Navigation in multiples of 16 steps

• No support for OLED display

• No support for multiple AKAI Fire controllers

• Something else I forgot

Features

• Mode LEDs show beat position in binary format: CHANNEL toggles every beat, MIXER toggles every two beats, USER 1 - every 8 beats and USER 2 - every 16 beats.

• Pad color in Note mode (or in Drum mode with STEP held) represents note (12 semitones of octave mapped to a hue); active notes (not stopped by note-offs) are showed in a dim color

• Pad color in Drum mode represents track color

• Pad color in Performance mode represents track/slot color; muted slots are showed in a dim color

• Tapping pad in Drum mode captures the nearest note/instrument before of after tapped position

• Both live loop recording and stepped recording are supported (set step size with STEP+⟲/⟳ SELECT and use STEP/SHIFT+STEP to skip steps)

com.fluorumlabs.Fire_V1.xrnx (237.0 KB)

Shortcut Reference Global Shortcuts Transport Combination Function PATTERN/SONG Switch “Repeat pattern” on/off PLAY (Re)start playback of current pattern WAIT a.k.a. SHIFT+PLAY Continue playback STOP Stop playback REC Swith “Edit mode” on/off Mode selection Combination Function NOTE Switch to note step editor (see Note/Drum Mode Shortcuts) DRUM Switch to pattern (see Note/Drum Mode Shortcuts) PERFORM Switch to pattern matrix mode (see Performance Mode Shortcuts) Miscellaneus Combination Function SNAP a.k.a. SHIFT+NOTE Switch live record quantize on/off TAP a.k.a. SHIFT+DRUM Switch pattern editor block loop on/off OVERVIEW a.k.a. SHIFT+PERFORM Show/hide spectrum analyzer METRONOME a.k.a. SHIFT+PATTERN/SONG Switch “Metronome” on/off COUNTDOWN a.k.a. SHIFT+STOP Switch “Metronome pre-count” on/off LOOP REC a.k.a. SHIFT+REC Switch “Follow player” on/off BROWSER Show/hide instrument selection panel (see Browser Shortcuts) MODE+⟲ SELECT Undo MODE+⟳ SELECT Redo Browser Shortcuts Combination Function ⟲ SELECT Select previous instrument ⟳ SELECT Select next instrument Note/Drum Mode Shortcuts Navigation Combination Function ▲ PATTERN Scroll up ▼ PATTERN Scroll down ▶ GRID Scroll right (show next page of 16 steps) ◀ GRID Scroll left (show previous page of 16 steps) SHIFT+▲ PATTERN Select previous track SHIFT+▼ PATTERN Select next track ALT+▲ PATTERN Insert new track before current ALT+▼ PATTERN Insert new track after current SHIFT+ALT+▲ PATTERN Delete current track and select previous SHIFT+ALT+▼ PATTERN Delete current track and select next SHIFT+*MUTE* Add new note column ALT+*MUTE* Duplicate note column SHIFT+ALT+*MUTE* Delete note column STEP Move cursor to next step in pattern editor SHIFT+STEP Move cursor to previous step in pattern editor STEP+⟲/⟳ SELECT Change step size Selection Combination Function *PAD* Select note column line in pattern (also set/clear step in Drum Mode) *PAD*+*PAD* Select block in pattern SHIFT+*PAD* Select block in pattern, starting at previously selected note column line *MUTE* Select whole note column 2× *MUTE* Select whole track Editing Combination Function STEP+*PAD* Set/clear note off ⟲/⟳ VOLUME Adjust selection volume ⟲/⟳ PANNING Adjust selection panning ⟲/⟳ FILTER Adjust selection delay ⟲/⟳ RESONANCE Adjust hue color of current track ⟲/⟳ SELECT Transpose selection ALT+⟲/⟳ SELECT Increment/decrement instrument within selection ALT+SHIFT+VOLUME/PANNING/FILTER (touch) Clear volume/panning/delay of selection MODE+VOLUME/PANNING (touch) Interpolate volume/panning within selection Block operations Combination Function ALT+*PAD* Paste selection at desired position SHIFT+ALT+*PAD* Clear selection SHIFT+⟲/⟳ SELECT Move selected block forward/backward, or rotate, if whole pattern is selected SHIFT+▶ GRID Shift page content (16 steps) to next page SHIFT+◀ GRID Shift page content (16 steps) to previous page ALT+▶ GRID Duplicate page content (16 steps) to next page, expanding pattern if needed ALT+◀ GRID Duplicate page content (16 steps) to previous page, expanding pattern if needed SHIFT+ALT+▶ GRID Delete current page (16 steps) and select next page, shortening pattern SHIFT+ALT+◀ GRID Delete current page (16 steps) and select previous page, shortening pattern Miscellaneous Combination Function STEP+*MUTE* Switch slot mute for current track Performance Mode Shortcuts Navigation Combination Function ▲ PATTERN Scroll up ▼ PATTERN Scroll down ⟲/⟳ SELECT Scroll up/down ▶ GRID Scroll right ◀ GRID Scroll left Editing Combination Function *PAD* Select slot *PAD*+*PAD* Duplicate slot ALT+*PAD* Duplicate selected slot SHIFT+*PAD* Move selected slot SHIFT+ALT+*PAD* Clear slot ⟲/⟳ VOLUME Adjust mixer volume for selected track ⟲/⟳ PANNING Adjust mixer panning for selected track ⟲/⟳ RESONANCE Adjust hue color for selected slot SHIFT+*MUTE* Add new pattern to sequence ALT+*MUTE* Duplicate pattern in sequence SHIFT+ALT+*MUTE* Delete pattern from sequence Sequencing Combination Function *MUTE* Schedule pattern/start playback if stopped STEP+*MUTE* Switch to pattern immediately STEP+*PAD* Mute/unmute slot

Posts: 1

Participants: 1

Read full topic

@stoiximan wrote:

As simple as it gets.Now to find some lyrics for it .Any ideas are welcome

Posts: 1

Participants: 1

Read full topic

@Rhythmersion wrote:

Here’s my latest creation… again it’s a vocal house track using a female acapella …
The acapella came from acapellas4u, a pretty decent one with no background audio. There is a mixed bag on there, some gems but some not so great.
As ever this was completely compiled using Renoise, with a mix of VST’s and samples.
Hope you enjoy and thanks in advance if you do have a listen

Posts: 1

Participants: 1

Read full topic

@trueschool wrote:

I see this every day on the way to work and I always think of how important it is to FINISH your songs, not just keep endlessly twiddling on beats.

I plan to frame this and put it up in my studio as a reminder to stop fussing and get my music out into the world - hope it helps you do the same…

Posts: 1

Participants: 1

Read full topic

@KnownUn wrote:

No talking, just music…

PEACE!

Posts: 1

Participants: 1

Read full topic

@robbie0 wrote:

I’m using the Renoise demo and I have a channel that is on, not muted or turned off, but I can only hear its output in solo mode. How can I rectify this problem so I can always hear it?

Posts: 2

Participants: 1

Read full topic

@Dry_Eyes wrote:

Haven’t made a new track in a while, been dealing with head issues. But here you are!

Posts: 1

Participants: 1

Read full topic

@JungleCurry wrote:

Is it possible to get my forum username changed to Mokey?

Seen a few posts like this. Couldn’t find a moderator to message and new to the forums.

Please feel free to delete this afterwards!

Posts: 1

Participants: 1

Read full topic

@RachmanEnough wrote:

Hi,

sorry if the question was answered already. I am overwhelmed by the complexity of the new forum capabilities. My question is, why in Redux, when I choose keymap as mapping mode are the shuffle and other options deactivated. See image :

Thanks and sorry, if the question has been answered already.

Renoise still rocks (just not the forum)

Posts: 2

Participants: 1

Read full topic

@JungleCurry wrote:

Hi Guys,

Sorry if this has already been covered, searched everywhere but couldn’t find a solution or one that made sense to me.

Every time I try to process a sample I get the error message below.

Can someone help me? I want to know if I have properly installed/setup the wrapper.

I installed the GUI wrapper from http://the-akaizer-project.blogspot.com/ - Do I need to install anything else? Have tried to run the CLI edition but it doesn’t seem to be doing anything.

Am a complete newbie to Renoise and still working things out, so please excuse me if I’m making a silly mistake, which I’m sure I am.

Thanks!

Posts: 1

Participants: 1

Read full topic

@rainydayshirts wrote:

Something of a doodle. WIP. Needs something more.

Composition and Mix in Renoise. Master in Reaper.

Posts: 1

Participants: 1

Read full topic

@EETTEE wrote:

I made an instrument with macros for white noise risers and hits. It also has wobble parameters, stereo, and the filter which makes the main sound. There are some empty spaces and I might use it to add a tonal or texture element to it so it is not just white noise. It’s useful for what it is, though, and it saves time.

WOOSH.xrni (394.4 KB)

Posts: 1

Participants: 1

Read full topic

@Circe wrote:

Hi, I want to share a song created with orchestral instruments. Using of course… RENOISE

Start with strings in stacatto and finish more kindly with quiet pads.

I hope you like it, I do not like to say that it is incomplete, but it is true, many parts of the song are improvable and can be altered.

Please … an opinion on her criticize please.

Thank you!!!

Posts: 1

Participants: 1

Read full topic

@Jezbian wrote:

I have imported multiple stem wavs into separate instruments. Each of them has the same period of silence at the start and I want to trim the same amount from each sample in a reliable way (ie, without having to manually select the area by using the mouse). If batch trimming is possible too, this would be fantastic.

Posts: 1

Participants: 1

Read full topic

@NoTimeForDaemons wrote:

Hiya folks! Here’s the link https://soundcloud.com/john-daemons Enjoy!

Posts: 1

Participants: 1

Read full topic

@stoiximan wrote:

It started as a jam but liked the direction it was going.It needs more work though.

Posts: 1

Participants: 1

Read full topic

@Fabrice wrote:

Hiii there!

Here is a future funk track I’m working on.

I’m not sure about the sax part (from 1’45, made with chopped samples), maybe less dreamy than I wanted… That’s still in progress.

Posts: 1

Participants: 1

Read full topic

@robbies wrote:

It was time to upgrade my computer. I’ve always had a Mac, but these days I don’t feel the price for one is worth what you get so I made the switch. I switched to PC.

Now, the problem I have is that some of my songs are using AU Instruments and obviously those won’t work with PC. So, is there a way to convert AU into VST? I still have a Mac laptop with Renoise and AU & VST’s installed.

Posts: 1

Participants: 1

Read full topic

@dspasic wrote:

Hi all again, another fresh idea

Posts: 1

Participants: 1

Read full topic